GMCforum: GMCnet » [GMCnet] SPARE WIRES IN THE LOOM

Home » Public Forums » GMCnet » [GMCnet] SPARE WIRES IN THE LOOM

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] SPARE WIRES IN THE LOOM [message #114895]

Sun, 13 February 2011 19:21

Gary Worobec

Messages: 867
Registered: May 2005

Karma:

Senior Member

Hi,
Is it possible that when GM did the 1973 coaches that they could have included the connector for the tach and +ignition wire for an HEI distributor. As I was unwrapping the loom to complete the FI there appears to be a connector that is a perfect match to an HEI distributor. I cannot seem to find it on my 1973 GMC wiring diagram. It only shows the wires going to a coil. Was HEI an option in 1973?

Thanks

Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] SPARE WIRES IN THE LOOM By: Gary Worobec on Sun, 13 February 2011 19:21
		Re: [GMCnet] SPARE WIRES IN THE LOOM By: jimk on Sun, 13 February 2011 19:45
		Re: [GMCnet] SPARE WIRES IN THE LOOM By: James Hupy on Sun, 13 February 2011 23:03
		Re: [GMCnet] SPARE WIRES IN THE LOOM By: gmchunter on Mon, 14 February 2011 18:06
		Re: [GMCnet] SPARE WIRES IN THE LOOM By: Gary Worobec on Mon, 14 February 2011 18:10

Previous Topic:	[GMCnet] Building and Fine-tuning Your GMC Pinewood Racer for Dummies!
Next Topic:	Washer Fluid Pump

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 02:19:03 CDT 2024

Total time taken to generate the page: 0.02738 seconds