GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] MANIFOLD GASKET LEAKS
[GMCnet] MANIFOLD GASKET LEAKS [message #112838] Sun, 23 January 2011 21:28 Go to previous message
Charles Aulgur is currently offline  Charles Aulgur   United States
Messages: 78
Registered: March 2006
Karma:
Member
: 6
Date: Sat, 22 Jan 2011 22:11:06 -0600
From: Ken Burton <n9cv@comcast.net>
>
Content-Type: text/plain; charset="ISO-8859-15"



Charles Aulgur wrote on Sat, 22 January 2011 21:54

> Bob, take a look at the joint where the exhaust manifold connects to
> the exhaust pipes on each side. A lot of muffler shops do not
> replace the special spring-loaded bolts that came from the factory
> for this flange connection. This connection should have a round
> gasket with a spherical surface where it mates to the exhaust pipe.
> The special bolts used there should have a shoulder that limits the
> compression of the springs to a certain amount so the connection can
> flex when the exhaust system expands and/or the engine moves around
> on it's mounts. If this joint is not allowed to flex the engine
> movement and exhaust pipe expansion puts to much load on the
> manifolds and causes the manifold-to-head gasket to leak and erode
> the manifold surface. You can see what the original configuration
> looks like in the maintenance manual/parts book.
>
> Chuck Aulgur
> La Mesa, CA
> 76 Royale with great brakes
>


Chuck, I have always wondered about the connection. I have headers
and I do not have that spring loaded connection. Do you think that
this connection is required with headers installed?

--
Ken Burton - N9KB


Ken, I think you would have a better chance of not having manifold/
header gasket leaks with the spring loaded flange connection if it
reduces the loading on the manifold/header gasket connection. I know
there are a lot of people that don't use them. I have over 100K
miles on a set of headers that have been on two different engines and
I have never had a header gasket leak. I also use self locking bolts
to attach the header to the engine.

Chuck Aulgur

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Previous Topic: Really Wet Floors
Next Topic: [GMCnet] propane
Goto Forum:
  


Current Time: Sun Sep 29 21:34:16 CDT 2024

Total time taken to generate the page: 0.00892 seconds