another non GMC minivan question need auto electrician (sorry) [message #112222] |
Mon, 17 January 2011 09:53 |
hertfordnc
Messages: 1164 Registered: September 2009 Location: East NC
Karma:
|
Senior Member |
|
|
I really tried researching this other places but once again, the questions i'm asking don't go well with net searches.
The Chrysler Town & Country with 3.8 is idling at 2200.
OBD II sensor says code P1294 which suggests a vacuum leak or an idle air control problem.
No evidence of vac leak so, I removed the idle air control valve and found it very gunky. I cleaned it and it moves freely.
the idle air control valve has two contacts. The resistance across them is 10 ohms. Does that suggest a problem? I would have expects more resistance across a coil.
It's 24 hours to get one from the parts store and it's 50 miles to the Man Mall so i need as much good info as possible.
Thanks
Dave & Ellen Silva
Hertford, NC
76 Birchaven, 1-ton and other stuff
Currently planning the Great american Road Trip Summer 2021
It's gonna take a lot of Adderall to get this thing right.
[Updated on: Mon, 17 January 2011 09:55] Report message to a moderator
|
|
|