[GMCnet] Propane sending unit [message #111358] |
Sat, 08 January 2011 16:52 |
Kingsley Coach
Messages: 2691 Registered: March 2009 Location: Nova Scotia Canada
Karma:
|
Senior Member |
|
|
Netters
As threatening, the topic of the propane sending unit is on..
The gauge at the tank is working.
There is a little post with a nut on the bottom edge of that gauge that has
a wire connected to it that goes to the monitor panel. This gauge on the
tank also has 2 smaller Philips screws surrounding the glass portion.
I'm guessing the post on the gauge is not connected to anything and the
internal wire(s) were broken off years ago !
SO, can this portion of the gauge be taken apart without propane loss?
Thanks
Mike in NS
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|