Norcold Frig ? [message #106199] |
Fri, 19 November 2010 11:25 |
RadioActiveGMC
Messages: 1020 Registered: November 2010 Location: Hot AZ desert
Karma:
|
Senior Member |
|
|
I have a norcold 87SEG2 frig. Question is is there a burner adjustment? Im not overly technical, but I found whoever put in the frig did a bad job with it. Long story short I fixed it and it lights in about 4 seconds now. However if my LP gas valve next to the frig is wide open flames will shoot out of the burner compartment.
I slowly reduce the value to lower the amt of LP going to the frig which solves the issue. However is there a adjustment at the burner itself since Im fairly sure when the frigs LP value is open all the way its getting WAY to much LP. When I close the valve about 1/4 turn its burns clean. Im guessing theres a way to adjust the acutal burner (if thats what it is called the part where the flame comes out)
***"Gettin There"-1973 23' Sequoia-
Michael, Onans smell, "Go solar/wind power!"
|
|
|