GMCforum: GMCnet » How is the furnace exhaust sealed?

Home » Public Forums » GMCnet » How is the furnace exhaust sealed? (Suburban cf-30)

Show: Today's Messages :: Polls :: Message Navigator

How is the furnace exhaust sealed? [message #105304]

Sat, 06 November 2010 22:03

Keith V

Messages: 2337
Registered: March 2008
Location: Mounds View,MN

Karma:

Senior Member

My furnace has a lot of exhaust smell when running. It's really stinky. I don't dare run it.

It's build date is 1999, and I doubt if it has 100 hours on it.
The heat exchanger looks like new, no visible cracks or holes

I pulled it out and check the connection to the exhaust pipe that goes through the side of the coach.

The furnace pipe just slides into the exhaust pipe. It seems like there should be more of a seal there. No clamps, no gasket?

Is this right?

Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com

Report message to a moderator

[Message index]

		How is the furnace exhaust sealed? By: Keith V on Sat, 06 November 2010 22:03
		Re: How is the furnace exhaust sealed? By: fred v on Sun, 07 November 2010 07:04
		Re: How is the furnace exhaust sealed? By: Keith V on Sun, 07 November 2010 11:54
		Re: How is the furnace exhaust sealed? By: roy1 on Sun, 07 November 2010 12:04
		Re: How is the furnace exhaust sealed? By: Keith V on Sun, 07 November 2010 12:10
		Re: How is the furnace exhaust sealed? By: roy1 on Sun, 07 November 2010 12:42
		Re: How is the furnace exhaust sealed? By: fred v on Sun, 07 November 2010 18:08
		Re: [GMCnet] How is the furnace exhaust sealed? By: tmaki on Sun, 07 November 2010 12:46
		Re: How is the furnace exhaust sealed? By: Hardie Johnson on Sun, 07 November 2010 12:59

Previous Topic:	Hamilton Standard Minature propeller
Next Topic:	[GMCnet] Girard Tankless LPG water heater

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 15 11:20:32 CDT 2024

Total time taken to generate the page: 0.00599 seconds