| TP, What are you using? [message #105153] |
Fri, 05 November 2010 15:42  |
Larry
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma:
|
Senior Member |
|
|
I've had continuous problems with TP getting caught on the tank sensors and giving me false level readings. By the end of the summer, my tanks read as full, even after dumping. At the end of this season, I filled the tanks to 3/4 full twice with plain water, and drove the length of my local road (1/8 mile) accelerating and breaking hard to get the water to slosh against the sensors and flush the TP off of the internal terminals. I was successful in flushing the TP off of the terminals so that now the tanks read as empty. I'm using Scott brand 1000 single sheet which is septic safe TP. I even took several sheets of TP (not used  ) , placed them in a glass of water and shook them to see if the TP dissolved...and it did break up quite easily. But why the problem? What brand/type of TP are you using in your MH? Have you had this problem, and what did you do to solve it?
Larry 
78 Royale w/500 Caddy
Menomonie, WI.
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
