Trouble with Electro Level I [message #100677] |
Wed, 22 September 2010 14:43 |
Jon payne
Messages: 495 Registered: May 2008
Karma:
|
Senior Member |
|
|
Guys,
My GMC has Electro Level I. The system works fine in Auto and will raise both sides up equally as it should. However when moving the RH control switch to RAISE position nothing happens. Moving the switch to LOWER position the bag deflates as it should. The LH control works fine.
I have the wiring manual showing the schematic and will have no problems troubleshooting. Pretty simple system.
What I am looking for and what the wiring schematic lacks is the interface between the RAISE/LOWER solenoids and the compressor. Only the wiring for the LEVEL CONTROL solenoids to the compressor is shown. I'm assuming the RAISE/LOWER solenoids are wired in the same way as the LEVEL CONTROL solenoids but it would be nice to see the schematic anyway.
Does anyone have this detail? I doubt I will need this information to troubleshoot this problem, It's more of a curiosity then anything.
Click here for schem. http://www.gmcmhphotos.com/photos/showphoto.php?photo=35988&title=electro-level-1-schema&cat=5607
Jon Payne
76 Palm Beach
Westfield,IN
|
|
|