GMCforum: GMCnet » [GMCnet] O Ring

Home » Public Forums » GMCnet » [GMCnet] O Ring

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] O Ring [message #98659]

Sun, 05 September 2010 15:14

paul h cashman

Messages: 176
Registered: May 2005

Karma:

Senior Member

Hi All,
Before installing my new Transmission Filter ,I thought ,I would check ,the
Manual.
The Manual says ,to install one O rind in the Bore ,then install the Filter
When I removed the old Filter ,one O Ring was on the Filter and the other
one was in the Bore.
On other ,Automobile.Transmission Filters I have worked on,the O rings were
always installed on the Filter.
Is Manny saying to put both O Rings in the bore first,then drive the Filter
through the O Rings,or just butt it up, till it makes contact with the O
Rings.?
Thanks.
Paul Cashman
Riverdale GA

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Paul H Cashman Riverdale Ga 1978 Transmode 1975 Corvette 1978 Beetle Convertible 1989 Harley Davidson Sportster

Report message to a moderator

[Message index]

		[GMCnet] O Ring By: paul h cashman on Sun, 05 September 2010 15:14
		Re: [GMCnet] O Ring By: fred v on Sun, 05 September 2010 17:39
		Re: [GMCnet] O Ring By: JShot on Sun, 05 September 2010 17:49

Previous Topic:	Q-jet from 77 caddy worth anything?
Next Topic:	Transmission Question

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Sep 24 17:31:26 CDT 2024

Total time taken to generate the page: 0.00733 seconds