GMCforum: GMCnet » MACERATOR Grease impeller

Home » Public Forums » GMCnet » MACERATOR Grease impeller

Show: Today's Messages :: Polls :: Message Navigator

MACERATOR Grease impeller [message #96774]

Sun, 22 August 2010 09:23

sparkienme

Messages: 5
Registered: September 2005
Location: coastal N.C.

Karma:

Junior Member

I think I read somewhere someone put a grease fitting in the macerator impeller body. My impeller freezes up when it sets for a while and I think a shot of grease on shut down would prevent this.
Anyone have any suggestions ?
Thanks
Mike

Report message to a moderator

[Message index]

		MACERATOR Grease impeller By: sparkienme on Sun, 22 August 2010 09:23
		Re: [GMCnet] MACERATOR Grease impeller By: Terry Skinner on Sun, 22 August 2010 09:42
		Re: [GMCnet] MACERATOR Grease impeller By: James Hupy on Sun, 22 August 2010 10:16
		Re: [GMCnet] MACERATOR Grease impeller By: fred v on Sun, 22 August 2010 10:52
		Re: [GMCnet] MACERATOR Grease impeller By: James Hupy on Sun, 22 August 2010 10:58
		Re: [GMCnet] MACERATOR Grease impeller By: WD0AFQ on Sun, 22 August 2010 12:53
		Re: MACERATOR Grease impeller By: carguy on Sun, 22 August 2010 15:21
		Re: MACERATOR Grease impeller By: WD0AFQ on Sun, 22 August 2010 15:35
		Re: MACERATOR Grease impeller By: Larry C on Wed, 25 August 2010 23:27
		Re: [GMCnet] MACERATOR Grease impeller By: Terrance Boyd on Wed, 25 August 2010 23:45
		Re: [GMCnet] MACERATOR Grease impeller By: Ken Henderson on Thu, 26 August 2010 00:04
		Re: [GMCnet] MACERATOR Grease impeller By: Larry C on Thu, 26 August 2010 14:58
		Re: [GMCnet] MACERATOR Grease impeller By: WD0AFQ on Thu, 26 August 2010 21:29

Previous Topic:	[GMCnet] Learn the applications for and possibly WIN a EBL Flash ECM System at GMCMI Fall Convention
Next Topic:	Isolation pads on a 78

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Jan 30 13:03:05 CST 2025

Total time taken to generate the page: 0.04878 seconds