GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Kitchen faucet needed?
Re: [GMCnet] Kitchen faucet needed? [message #95939] Sun, 15 August 2010 17:32 Go to previous message
James Moore is currently offline  James Moore   United States
Messages: 71
Registered: January 2004
Karma:
Member
Not sure what mounting system is used in an Elaganza. The one in my Palm
Beach only has one hole in the sink whick limits the replacement choices.
The standard home mount uses two holes with a third hole some times for a
sprayer.

Remove the old faucet and determine how many mounting holes it has and
their spacing and diameter. With a 1 hole mount measure the hole diameter.
Then take the old faucet to Lowes or Home Depot or your local harware store
and pick out the faucet you like that will fit the existing mountin holes.
It may be necessary to adapt the faucet fittings to match the fitting on
the water lines. If you have the old faucet with you, a clerk can easily
do that when you buy the new faucet.

Some of the home faucets come with a life time warrenty. All of them have
re-built kits available.

Jim Moore


> [Original Message]
> From: Jim Kanomata <jimkanomata@gmail.com>
> To: <gmclist@temp.gmcnet.org>
> Date: 8/11/2010 6:38:12 PM
> Subject: Re: [GMCnet] Kitchen faucet needed?
>
> Try putting them in without making a large hole.
>
> On Wed, Aug 11, 2010 at 4:49 PM, Dwayne Jacobson
> <dwayne@havenproperties.ca>wrote:
>
> > Go to Home Depot or something like that and buy a residential faucet -
with
> > a long neck
> > Dwayne Jacobson
> > 77 Eleganza II
> > White Rock
> >
> > -----Original Message-----
> > From: gmclist-bounces@temp.gmcnet.org
> > [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Joe Mondello
> > Sent: Wednesday, August 11, 2010 4:26 PM
> > To: gmclist@temp.gmcnet.org
> > Subject: Re: [GMCnet] Kitchen faucet needed?
> >
> >
> >
> > C Boyd wrote on Wed, 11 August 2010 18:07
> > > I need a replacement faucet for an Eleganza II. I would like tall
faucet
> > to set pots under. Anyone have ideas??
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > I am the one needing the faucet. Mary Mondello
> >
> > --
> > Joe Mondello
> > 75 Eleganza II
> > Crossville, Tennessee
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist


_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Previous Topic: New York E-Zpass users can save a bunch
Next Topic: Where is the oil pressure sending unit located?
Goto Forum:
  


Current Time: Fri Sep 27 04:21:28 CDT 2024

Total time taken to generate the page: 0.01666 seconds