GMCforum: GMCnet » [GMCnet] Exhaust Exit Question

Home » Public Forums » GMCnet » [GMCnet] Exhaust Exit Question

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Exhaust Exit Question [message #94891]

Fri, 06 August 2010 21:20

Ray Erspamer

Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin

Karma:

Senior Member

Good Evening

I'm wrapping up my new exhaust system. Installed 2 new 2 1/2" Dynomax Turbo
Flow mufflers up front after the headers that feed into a Y, then 3" exhaust
from the Y back.

I've noticed that most exhausts exit to the side at the rear passenger side. As
I was installing the new 3" line through the frame it looked like it would work
great just sticking straight out the back.

So is it best to put in a 90 and exit the side or let it stick straight out the
back ?????? Since I see most of them out the side, what am I missing here ??
Other than blowing the exhaust right onto what you tow or ????

Thanks

Ray

Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ray Erspamer 78 GMC Royale Center Kitchen 403, 3.70 Final Drive Holley Sniper Quadrajet EFI System, Holley Hyperspark Ignition System 414-484-9431

Report message to a moderator

[Message index]

		[GMCnet] Exhaust Exit Question By: Ray Erspamer on Fri, 06 August 2010 21:20
		Re: [GMCnet] Exhaust Exit Question By: pete lyons on Fri, 06 August 2010 21:46
		Re: [GMCnet] Exhaust Exit Question By: Kosier on Fri, 06 August 2010 21:57
		Re: [GMCnet] Exhaust Exit Question By: Bob de Kruyff on Fri, 06 August 2010 22:00
		Re: [GMCnet] Exhaust Exit Question By: zhagrieb on Fri, 06 August 2010 23:10
		Re: [GMCnet] Exhaust Exit Question By: Steven Ferguson on Sat, 07 August 2010 18:06
		Re: [GMCnet] Exhaust Exit Question By: hal kading on Sat, 07 August 2010 18:32
		Re: [GMCnet] Exhaust Exit Question By: USAussie on Sat, 07 August 2010 20:35
		Re: [GMCnet] Exhaust Exit Question By: Keith V on Sat, 07 August 2010 21:34
		Re: [GMCnet] Exhaust Exit Question By: jimk on Sat, 07 August 2010 22:03
		Re: [GMCnet] Exhaust Exit Question By: USAussie on Sat, 07 August 2010 23:01
		Re: [GMCnet] Exhaust Exit Question By: Steven Ferguson on Sun, 08 August 2010 07:11
		Re: [GMCnet] Exhaust Exit Question By: pete lyons on Sun, 08 August 2010 07:50
		Re: [GMCnet] Exhaust Exit Question By: gmcrv1 on Sun, 08 August 2010 08:35
		Re: [GMCnet] Exhaust Exit Question By: Ray Erspamer on Sun, 08 August 2010 08:38
		Re: [GMCnet] Exhaust Exit Question By: Dennis S on Sun, 08 August 2010 08:58
		Re: [GMCnet] Exhaust Exit Question By: jimk on Sun, 08 August 2010 13:05
		Re: [GMCnet] Exhaust Exit Question By: emerystora on Sun, 08 August 2010 13:29
		Re: [GMCnet] Exhaust Exit Question By: powerjon on Sun, 08 August 2010 13:33
		Re: [GMCnet] Exhaust Exit Question By: Ray Erspamer on Sun, 08 August 2010 08:36
		Re: [GMCnet] Exhaust Exit Question By: roy1 on Sun, 08 August 2010 11:47
		Re: [GMCnet] Exhaust Exit Question By: Ray Erspamer on Mon, 09 August 2010 12:46
		Re: [GMCnet] Exhaust Exit Question By: Deb Killion on Mon, 09 August 2010 13:15
		Re: [GMCnet] Exhaust Exit Question By: powerjon on Sun, 08 August 2010 11:43
		Re: [GMCnet] Exhaust Exit Question By: jimk on Fri, 06 August 2010 23:39
		Re: [GMCnet] Exhaust Exit Question By: bryant374 on Sat, 07 August 2010 08:48
		Re: [GMCnet] Exhaust Exit Question By: USAussie on Sat, 07 August 2010 20:35
		Re: [GMCnet] Exhaust Exit Question By: bryant374 on Sun, 08 August 2010 07:55
		Re: [GMCnet] Exhaust Exit Question By: rallymaster on Sun, 08 August 2010 00:25
		Re: [GMCnet] Exhaust Exit Question By: Chr$ on Sun, 08 August 2010 10:30
		Re: [GMCnet] Exhaust Exit Question By: JohnL455 on Sun, 08 August 2010 15:20
		Re: [GMCnet] Exhaust Exit Question By: jimk on Sun, 08 August 2010 16:20

Previous Topic:	Replacement hoses to hot water heater
Next Topic:	[GMCnet] FMCA -FMC

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 21 04:47:45 CDT 2024

Total time taken to generate the page: 0.01044 seconds