GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Gas Tank Heat Shields
Gas Tank Heat Shields [message #89721] Thu, 24 June 2010 11:44 Go to previous message
Neil is currently offline  Neil   United States
Messages: 271
Registered: July 2007
Location: Los Angeles and Magalia, ...
Karma:
Senior Member
Well, I am going to start on fabricating heat shields for the gas tanks this weekend. I am thinking 1/4 aluminum diamond plate, with spacers between the diamond plate and the tank, secured on three sides by the frame rail with maybe one "finger" in the middle of the passenger side diamond plate extending over the exhaust pipe to the passenger side frame rail. I already have heat shields between the exhaust pipes and the gas tanks.

Any been there done that advice before getting started?


Neil
76 Eleganza now sold
Los Angeles
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Overhead cabinet
Next Topic: Re: [GMCnet] Time to let her go
Goto Forum:
  


Current Time: Fri Oct 25 17:35:08 CDT 2024

Total time taken to generate the page: 0.01317 seconds