GMCforum: GMCnet » Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this)

Home » Public Forums » GMCnet » Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this)

Show: Today's Messages :: Polls :: Message Navigator

Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) [message #84228]

Wed, 12 May 2010 14:43

Larry

Messages: 2875
Registered: January 2004
Location: Menomonie, WI

Karma:

Senior Member

The FRONT BEARING DRILL FIXTURE is used to drill a grease hole in the front knuckle so that you can grease the front wheel bearings without taking the knuckle apart.

The tool can be found at Jimmy K's site:

http://www.appliedgmc.com/prod.itml/icOid/835

I borrowed the FRONT BEARING DRILL FIXTURE from a friend, but no directions came with the tool. So, here are some directions and a set of pics.

Jimmy K...look at this and see if I got anything wrong.

Pics are at this URL:

http://www.gmcmhphotos.com/photos/misc.php?action=orderphotos&s=&cat=5464

Otherwise, Hope this helps someone...

Larry

78 Royale w/500 Caddy
Menomonie, WI.

Report message to a moderator

[Message index]

		Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Larry on Wed, 12 May 2010 14:43
		Re: Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: carguy on Wed, 12 May 2010 14:47
		Re: Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Larry on Wed, 12 May 2010 14:54
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Mr ERFisher on Wed, 12 May 2010 14:47
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: jw mills on Wed, 12 May 2010 15:14
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Mr ERFisher on Wed, 12 May 2010 15:17
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Larry on Wed, 12 May 2010 15:42
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Mr ERFisher on Wed, 12 May 2010 17:51
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Larry on Wed, 12 May 2010 20:32
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Mr ERFisher on Wed, 12 May 2010 21:57
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Larry on Thu, 13 May 2010 10:44
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Mr ERFisher on Thu, 13 May 2010 12:14
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Larry on Thu, 13 May 2010 12:36
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) By: Ken Burton on Thu, 13 May 2010 14:17
		Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. lookat this) By: hnielsen2 on Wed, 12 May 2010 16:51

Previous Topic:	Am I looking for the right thing
Next Topic:	Re: [GMCnet] A quick fix

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Dec 26 00:29:05 CST 2024

Total time taken to generate the page: 0.00998 seconds