GMCforum: GMCnet » [GMCnet] AN-6 fittings, elbows, hose recommendations

Home » Public Forums » GMCnet » [GMCnet] AN-6 fittings, elbows, hose recommendations

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] AN-6 fittings, elbows, hose recommendations [message #81995]

Mon, 26 April 2010 17:41

Ken Coit

Messages: 151
Registered: November 2005

Karma:

Senior Member

Gary Worobec has some great photos posted of his fuel system components.
While I think I might have conquered double flare hard lines, I want to
replace the hard line with something I know I can install and replace in the
field, so I am going with SS braid covered hose. I have found the part
number for the Quadrajet 1" inlet to AN-6, it is the Aeroquip [image:
Aeroquip FCM2107 / FBM2107 - Fits Hose Size
-06]<https://www.aeroquip.cc/fcm2107fbm2107-fitshosesize-06.aspx>
FCM2107
/ FBM2107 - Fits Hose Size
-06<https://www.aeroquip.cc/fcm2107fbm2107-fitshosesize-06.aspx>
There is also a 7/8" version for older carbs.

The washer is: FBM3517 / FCM3517 - Fits Dash Size -12 (5 per package)

BTW, Eaton seems to have pretty good prices on these.
https://www.aeroquip.cc

I plan to add a filter ahead of the carb, but not where the stock filter
housing is located. Does anyone have a recommendation for a filter with AN-6
ports?*
*
I have not found the part numbers for the AN-6 Female to Male 90� elbow.

Does anyone have this?

Thanks,

Ken

--
Ken Coit, ND7N
Raleigh, NC
Parfait Royale
1978 Royale Rear Bath, 403, 3.07
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] AN-6 fittings, elbows, hose recommendations By: Ken Coit on Mon, 26 April 2010 17:41
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: zhagrieb on Mon, 26 April 2010 18:05
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: g.winger on Mon, 26 April 2010 19:04
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: USAussie on Mon, 26 April 2010 19:20
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: cbwoodsr on Mon, 26 April 2010 19:26
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: USAussie on Mon, 26 April 2010 19:32
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: wally on Mon, 26 April 2010 19:36
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: Keith V on Mon, 26 April 2010 21:02
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: USAussie on Mon, 26 April 2010 21:35
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: Keith V on Tue, 27 April 2010 07:13
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: petemosss on Mon, 26 April 2010 21:09
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: Steven Ferguson on Tue, 27 April 2010 08:28
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: fred v on Tue, 27 April 2010 08:04
		Re: [GMCnet] AN-6 fittings, elbows, hose recommendations By: Rick Denney on Wed, 05 May 2010 10:16

Previous Topic:	[GMCnet] 23 footer in Phoenix (eBay 200464521974)
Next Topic:	Re: [GMCnet] Video - Dixielander's Rally - Bean Statation - 2010

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 04:46:34 CST 2024

Total time taken to generate the page: 0.01611 seconds