GMCforum: GMCnet » Re: [GMCnet] Entry door hinges

Home » Public Forums » GMCnet » Re: [GMCnet] Entry door hinges

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Entry door hinges [message #73647]

Fri, 12 February 2010 15:59

David L Greenberg

Messages: 899
Registered: January 2004
Location: Port St Lucie, FL

Karma:

Senior Member

On Fri, 12 Feb 2010 11:27:37 -0600 Drew Wood <drew@usa650.com> writes:
>
>
> Well, it seems to me that there is a lot more "gap" on the top of
> the hinge than the bottom, and that the door could come up a little
> bit to center it in the frame better. There also does not seem to be
> any bushing left on the bottom of the top hinge at all. I will see
> if the pins will come out and go from there!
>
> Thanks,
>
> Drew

I seem to recall I drove my pins out from the bottom with a drift pin and
a mighty
big hammer. There is supposed to be washers (teflon or the like?) on the
bearing surface.

David Lee Greenberg
Port St Lucie, FL
Dedicated to the Preservation of the Classic GMC Motorhome
http://GMCmhRegistry.com
http://www.picturetrail.com/gmcregistry
____________________________________________________________
Hotel
Hotel pics, info and virtual tours. Click here to book a hotel online.
http://thirdpartyoffers.juno.com/TGL2141/c?cp=u9UG6QH6dol5rxGse_cTvgAAJ1Csyv5OnZl2mKFYY98JLnqKAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAATRAAAAAA=
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Dave Greenberg
Dedicated to the Preservation of the GMC Clasic
http:GMCmhRegistry.com davegreenberg1@juno.com

Report message to a moderator

[Message index]

Re: [GMCnet] Entry door hinges

By: David L Greenberg on Fri, 12 February 2010 15:59

Previous Topic:	[GMCnet] Howell TBI injector information
Next Topic:	Progressive Paid the Bill

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Sep 25 00:25:38 CDT 2024

Total time taken to generate the page: 0.00893 seconds