Porkchop Klocking [message #72288] |
Sat, 30 January 2010 18:24 |
g.winger
Messages: 792 Registered: February 2008 Location: Warrenton,Missouri
Karma:
|
Senior Member |
|
|
Its been awhile, got the torsion bars back in, but, after I put my tool on and started crankin ,I got it about half way and I still had a long,long way to go. So,,,before I crank on them at all the ends are about 2.25 or 2.5 inches down. OR looking from the rear of the drivers side about 3:30 or so. Put them in 1/6th of a turn higher but they are really high. I wrote down how I removed them and lost my notes. Left and Right marks go to the rear,,Yes?? Thanks,,,,PL.
|
|
|