GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Good & Bad News
[GMCnet] Good & Bad News [message #69990] Thu, 07 January 2010 22:59 Go to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Well, I've got some good news and some bad news:

The good news is that today Larry Weidner and I carried my Cad 500 to the
machine shop to get it checked out and prepped for installation in the
X-Birchaven. :-)

The bad news is that it's not really voluntary. :-(

For the past couple of weeks I've been seriously trying to get the kinks out
of my EFI, including adding the EBL flash upgrade to the ECM. Over the past
week or so at a fast idle of around 1800 rpm, I've noticed a rat-a-tat-tat
that I really couldn't hear well enough to identify. When Larry & Lucy
arrived, of course Larry and I had to get greasy. With his functioning
hearing, he was able to make an ominous diagnosis. By pulling plug wires we
confirmed that #7 rod's knocking. :-((

No explanation unless my NASCAR engine builder friend's first hypothesis is
correct: Predetonation. I've heard no pinging EVER from this engine. Then
again, my straight through steel pack mufflers are REAL quiet. And the
engine has not been under significant load since we went to Santa Rosa last
March. But I have been installing and tuning a Computer Controlled
Distributor and running some pretty large spark advances, though only under
no-load conditions.

Oh well, with only lemons, one must make lemon pie or lemonade.

Dependent on the engine builder's progress, I'll soon remove the engine and
open the bottom end to see exactly what's happened. I do have another
perfect, already polished crank in the shop, so I'll probably stick it in
there after cleaning up any debris.

Rick, I'm sorry I somehow damaged "your" engine. :-( Since this is the
second essentially unexplained #7 rod bearing failure in this engine, I
don't think you should install it.

Ken H.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Today's Woot: Acer Aspire One 10.1” Netbook
Next Topic: Re: [GMCnet] Carb Overhaul
Goto Forum:
  


Current Time: Mon Nov 18 07:34:33 CST 2024

Total time taken to generate the page: 0.01309 seconds