| [GMCnet] Ride Height [message #68985] |
Wed, 30 December 2009 21:54  |
George Zhookoff
Messages: 398
Registered: December 2004
Location: Snellville, GA
Karma: 6
|
Senior Member |
|
|
Well replaced control arms with steve F rebuilt arms. Checked ride height before going for an alignment. FL down 2" FR down almost 3". Porkchop adjustment bolts look like 2" more adjustment left. My question: Is this enough to pickup the front the required additional height?
Thanks,
George Zhookoff
78 EL II
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Ride Height [message #68987 is a reply to message #68985] |
Wed, 30 December 2009 22:17  |
GMCWiperMan
Messages: 1248
Registered: December 2007
Karma: 1
|
Senior Member |
|
|
George,
IIRC, 6 turns -->1" in ride height. If correct you should have plenty of
threads left. If not, you can buy longer grade 8 bolts, round the end to
fit the socket, and gain a little more adjustment. Do you need to borrow my
torsion bar tool? Ooops! -- it's in Chicago. But if you need it, I'll try
to get it back. Better yet, I think Dixielanders own one; John Richardson
is the keeper.
Ken H.
On Wed, Dec 30, 2009 at 10:54 PM, George Zhookoff <gzhookoff@e2m.com> wrote:
> Well replaced control arms with steve F rebuilt arms. Checked ride height
> before going for an alignment. FL down 2" FR down almost 3". Porkchop
> adjustment bolts look like 2" more adjustment left. My question: Is this
> enough to pickup the front the required additional height?
> Thanks,
> George Zhookoff
> 78 EL II
> _______________________________________________
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
