GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Windshield Washer
Windshield Washer [message #67550] Tue, 15 December 2009 17:12 Go to next message
Oldngray is currently offline  Oldngray   United States
Messages: 544
Registered: August 2009
Location: Punta Gorda Florida
Karma: 0
Senior Member
Installed the Lumina Arms today and they sure make a bigger sweep.
Found that the washer does not work well. Not much pressure, water just dribbles out. Was able to blow through the hoses but still do not get much water.
Pump?

Richard MacDonald Punta Gorda, Florida Sold our TZE April 2015

Report message to a moderator

Re: [GMCnet] Windshield Washer [message #67551 is a reply to message #67550] Tue, 15 December 2009 17:19 Go to previous messageGo to next message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
Senior Member
It might be the pump - mine work very well. I bought the set from Jim K.

Larry Davick
The Mystery Machine
----- Original Message -----
From: "Richard MacDonald" <rm1936@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Tuesday, December 15, 2009 3:12:32 PM GMT -08:00 US/Canada Pacific
Subject: [GMCnet] Windshield Washer



Installed the Lumina Arms today and they sure make a bigger sweep.
Found that the washer does not work well. Not much pressure, water just dribbles out. Was able to blow through the hoses but still do not get much water.
Pump?
--
Richard MacDonald
Punta Gorda, Florida
76 Edgemonte
94 K2500 6.5 Turbo Diesel Silverado


_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy

Report message to a moderator

Re: [GMCnet] Windshield Washer [message #67554 is a reply to message #67551] Tue, 15 December 2009 17:56 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
Richard, I could not find a box and pump when mine needed replacing. So, I got a bag with motor in it from JC Whitney. Something over ten bux. Fixing to put one in my vdub.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: [GMCnet] Windshield Washer [message #67557 is a reply to message #67550] Tue, 15 December 2009 18:10 Go to previous messageGo to next message
dngmissett is currently offline  dngmissett   United States
Messages: 84
Registered: February 2004
Karma: 0
Member
Hi Richard

Here is what I did to pump up the Lumina wiper washer jets.
http://www.gmcmhphotos.com/photos/showphoto.php?photo=12699

Dick Missett
Wyoming, PA


--- On Tue, 12/15/09, Richard MacDonald <rm1936@gmail.com> wrote:

From: Richard MacDonald <rm1936@gmail.com>
Subject: [GMCnet] Windshield Washer
To: gmclist@temp.gmcnet.org
Date: Tuesday, December 15, 2009, 6:12 PM



Installed the Lumina Arms today and they sure make a bigger sweep.
Found that the washer does not work well.  Not much pressure, water just dribbles out.  Was able to blow through the hoses but still do not get much water. 
Pump?
--
Richard MacDonald
Punta Gorda, Florida
76 Edgemonte
94 K2500 6.5 Turbo Diesel Silverado


_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: Windshield Washer [message #67559 is a reply to message #67550] Tue, 15 December 2009 18:33 Go to previous messageGo to next message
roy1 is currently offline  roy1   United States
Messages: 2126
Registered: July 2004
Location: Minden nevada
Karma: 6
Senior Member
I found a nice washer tank at the self service auto wrecker to replace mine that fit in the original location. The neat part about it was it has 2 pumps in it . It came off a Jeep wagon or SUV 1980's. It has plenty of volume for the Lumina nozzles.
Roy

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

Re: Windshield Washer [message #67560 is a reply to message #67559] Tue, 15 December 2009 18:37 Go to previous messageGo to next message
gmchunter is currently offline  gmchunter   United States
Messages: 222
Registered: March 2008
Location: ORANGE, CA
Karma: 0
Senior Member
Roy, did it have fitting for original mount? My 78 have v shaped piece of sheetmetal on front of the HVAC box that the original washer bottle mount slid into like this \\ //. Looking for a new washer bottle with mount.

Michael

Report message to a moderator

Re: Windshield Washer [message #67597 is a reply to message #67550] Wed, 16 December 2009 06:38 Go to previous messageGo to next message
Oldngray is currently offline  Oldngray   United States
Messages: 544
Registered: August 2009
Location: Punta Gorda Florida
Karma: 0
Senior Member
Thanks everyone, am going back to the Mall <bg> I really like that place.

Richard MacDonald Punta Gorda, Florida Sold our TZE April 2015

Report message to a moderator

Re: Windshield Washer [message #67634 is a reply to message #67560] Wed, 16 December 2009 12:22 Go to previous messageGo to next message
roy1 is currently offline  roy1   United States
Messages: 2126
Registered: July 2004
Location: Minden nevada
Karma: 6
Senior Member
Michael

It doesn't have the slide mount I used one of the original A/C cover screws for the right side and added another screw to hold the left side of the unit. The 2 pumps are factory mounted to the bottom of the unit which is pretty similar in size to the original unit. When I was looking for a replacement at the junk yard the Jeep and AMC seemed like the best bet most of the others had an unusual shape. I thought the dual pump setup was a good thing.
Roy

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

Re: Windshield Washer [message #67695 is a reply to message #67550] Thu, 17 December 2009 11:31 Go to previous messageGo to next message
Oldngray is currently offline  Oldngray   United States
Messages: 544
Registered: August 2009
Location: Punta Gorda Florida
Karma: 0
Senior Member
I picked up a 98 Jeep Grand Cherokee tank with two pumps on it. I now need to determine where to mount it. Looking at the left fender liner. A little reach to fill up the tank but really the only unrestricted area for this 1 gallon tank. I could mount it right where the OEM mounts but part of the tank and the pumps/wires will show through the grille. Going to think on it a bit.

Richard MacDonald Punta Gorda, Florida Sold our TZE April 2015

Report message to a moderator

Re: Windshield Washer [message #67717 is a reply to message #67550] Thu, 17 December 2009 15:57 Go to previous messageGo to next message
Oldngray is currently offline  Oldngray   United States
Messages: 544
Registered: August 2009
Location: Punta Gorda Florida
Karma: 0
Senior Member
All finished, really appreciate all of your thoughts and suggestions. This Forum and its members are just wonderful.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=5372

Richard MacDonald Punta Gorda, Florida Sold our TZE April 2015

Report message to a moderator

Re: [GMCnet] Windshield Washer [message #67720 is a reply to message #67717] Thu, 17 December 2009 16:11 Go to previous messageGo to next message
powerjon is currently offline  powerjon   United States
Messages: 2446
Registered: January 2004
Karma: 5
Senior Member
Richard,
Nice installation, should work great.

J.R. Wright

> All finished, really appreciate all of your thoughts and
> suggestions. This Forum and its members are just wonderful.
>
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=5372
> --
> Richard MacDonald
> Punta Gorda, Florida
> 76 Edgemonte
> 94 K2500 6.5 Turbo Diesel Silverado

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan

Report message to a moderator

Re: Windshield Washer [message #67729 is a reply to message #67717] Thu, 17 December 2009 17:20 Go to previous message
C Boyd is currently offline  C Boyd   United States
Messages: 2629
Registered: April 2006
Karma: 18
Senior Member
Oldngray wrote on Thu, 17 December 2009 16:57

All finished, really appreciate all of your thoughts and suggestions. This Forum and its members are just wonderful.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=5372







Cool Cool
Smile Smile Smile


C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

Previous Topic: blender base
Next Topic: [GMCnet] Passenger side seat swivel
Goto Forum:
  


Current Time: Sat Nov 16 14:36:08 CST 2024

Total time taken to generate the page: 0.00869 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software