GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Dave Lenzi's Offset Upper Control Arms
[GMCnet] Dave Lenzi's Offset Upper Control Arms [message #65394] Mon, 23 November 2009 12:45 Go to next message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
Senior Member
G’day,

At Pueblo Dave Lenzi displayed his new offset upper control arms which when
installed on his coach enabled him to get over 5 degrees of caster. I know
he had four sets at the show and have heard that Lanny Young purchased and
installed a pair and is happy with them.

Anyone else install them? If yes what were your findings?

Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
Re: [GMCnet] Dave Lenzi's Offset Upper Control Arms [message #65412 is a reply to message #65394] Mon, 23 November 2009 16:35 Go to previous messageGo to next message
druber is currently offline  druber   United States
Messages: 58
Registered: March 2004
Location: Syracuse, IN
Karma: 0
Member
Ron Bolser has a pair installed. Not sure if he monitors this forum. You
might contact him offline if he doesn't pipe up.
Druber

-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Rob Mueller
Sent: Monday, November 23, 2009 1:45 PM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Dave Lenzi's Offset Upper Control Arms

G’day,

At Pueblo Dave Lenzi displayed his new offset upper control arms which when
installed on his coach enabled him to get over 5 degrees of caster. I know
he had four sets at the show and have heard that Lanny Young purchased and
installed a pair and is happy with them.

Anyone else install them? If yes what were your findings?

Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Dave Lenzi's Offset Upper Control Arms [message #65747 is a reply to message #65412] Thu, 26 November 2009 12:56 Go to previous messageGo to next message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
Senior Member
I'd like to learn more about them as well. Does anyone know if Jim K
will carry them?

Thanks,

Larry Davick
The Mystery Machine

On Nov 23, 2009, at 2:35 PM, Ray Swartzendruber wrote:

> Ron Bolser has a pair installed. Not sure if he monitors this
> forum. You
> might contact him offline if he doesn't pipe up.
> Druber
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Rob Mueller
> Sent: Monday, November 23, 2009 1:45 PM
> To: gmclist@temp.gmcnet.org
> Subject: [GMCnet] Dave Lenzi's Offset Upper Control Arms
>
> G’day,
>
> At Pueblo Dave Lenzi displayed his new offset upper control arms
> which when
> installed on his coach enabled him to get over 5 degrees of caster.
> I know
> he had four sets at the show and have heard that Lanny Young
> purchased and
> installed a pair and is happy with them.
>
> Anyone else install them? If yes what were your findings?
>
> Regards,
> Rob Mueller
> Sydney, Australia
> AUS '75 Avion-The Blue Streak TZE365V100428
> USA '75 Avion-Double Trouble TZE365V100426
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
Re: [GMCnet] Dave Lenzi's Offset Upper Control Arms [message #65748 is a reply to message #65747] Thu, 26 November 2009 13:10 Go to previous message
Charles is currently offline  Charles   United States
Messages: 455
Registered: January 2004
Karma: 0
Senior Member
Contact Dave direct. I don't think he monitors the list.
I have never seen a post by him. He will tell you like
it is. Best quality workmanship I have ever seen.
Dave Lenzi http://www.bdub.net/lenzi/index.html
810-653-3902 Steereing components, leveler linkage,
leveler valve rebuilding, embossed copper exhaust gasket.
Charles

----- Original Message -----
From: "Larry Davick" <ljdavick@comcast.net>
To: <gmclist@temp.gmcnet.org>
Sent: Thursday, November 26, 2009 12:56 PM
Subject: Re: [GMCnet] Dave Lenzi's Offset Upper Control Arms


I'd like to learn more about them as well. Does anyone know if Jim K
will carry them?

Thanks,

Larry Davick
The Mystery Machine

On Nov 23, 2009, at 2:35 PM, Ray Swartzendruber wrote:

> Ron Bolser has a pair installed. Not sure if he monitors this
> forum. You
> might contact him offline if he doesn't pipe up.
> Druber
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Rob Mueller
> Sent: Monday, November 23, 2009 1:45 PM
> To: gmclist@temp.gmcnet.org
> Subject: [GMCnet] Dave Lenzi's Offset Upper Control Arms
>
> G’day,
>
> At Pueblo Dave Lenzi displayed his new offset upper control arms
> which when
> installed on his coach enabled him to get over 5 degrees of caster.
> I know
> he had four sets at the show and have heard that Lanny Young
> purchased and
> installed a pair and is happy with them.
>
> Anyone else install them? If yes what were your findings?
>
> Regards,
> Rob Mueller
> Sydney, Australia
> AUS '75 Avion-The Blue Streak TZE365V100428
> USA '75 Avion-Double Trouble TZE365V100426
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Charles Wersal
Duncanville, Texas
26 foot 1975 Glenbrook
Pandora's Box

Previous Topic: [GMCnet] e-brake pictures
Next Topic: [GMCnet] LarC's power loss/stalling problem
Goto Forum:
  


Current Time: Sat Oct 26 05:19:32 CDT 2024

Total time taken to generate the page: 0.02332 seconds