Home » Public Forums » GMCnet » [GMCnet] Holley Remanufactured Quadrajet Carbs
[GMCnet] Holley Remanufactured Quadrajet Carbs [message #65189] |
Sat, 21 November 2009 13:32 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
G'day,
I sent the following query to Holley's Reman Division Tech Support email:
I would like to know the Rochester OEM part numbers for the carbs Sales
Number: 64-7256 & 64-7259 to verify that they are the correct carbs for a
GMC Motorhome. Thank you, Rob
I got the following response:
7045254 = GMC
7045554 = GMC
7043254 = GMC
17056258
17058250
17058253
17058553
17059258
17059259
17055645
17055635
17058254 = GMC
17065609
17057258
From the info that has been provided in previous GMCnet messages I added =
GMC.
Someone that needs a rebuilt carb will have to order one and see what they
get and how it works. Considering the fact that Pace Performance will sell
it for $208.69 (including core charge) it would be worth a shot. If it
doesn't work properly I'd think it would be covered by warranty.
Assuming that Pace is not "The Pirates" Larry was referring to! ;-)
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: Rob Mueller [mailto:robmueller@iinet.net.au]
Sent: Wednesday, 18 November 2009 11:48 AM
To: 'gmclist@temp.gmcnet.org'
Subject: RE: [GMCnet] What's special about the GMC carb?
STOP THE PRESSES!
Look what I just stumbled on to on the Holley Reman website:
http://www.holley.com/BrowseCatalogs.asp?Catalog=Reman&Page=261
The first numbers are listed here and continue to page 264.
Rochester
O.E. Number Sales No.
7043254 64-7256
7045254 64-7256
7045554 64-7256
17057254 Not listed (CA Carb)
17057559 Not listed
17058254 64-7259
17058559 Not listed (CA Carb)
Now whether they have these carbs in stock is another question!
Here's the contact info I would suggest that someone in the USA give them a
call and see what they can find out:
Holley Performance Products
1801 Russellville Rd.
Bowling Green, KY 42101
270 782-2900 (Tel)
270 781-9940 (Fax)
270 782-2900 (Custom Shop)
270 781-9741 (Tech Service)
270 781-9772 (Fax: Tech Service)
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #83635 is a reply to message #83624] |
Sat, 08 May 2010 09:53 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Steve,
You're not wrong!
I did notice something interesting:
We can Restore your carburetor
Or call with a carb number we have lots cores
Chris, it might be worth your time to give them a call to see if they have
any cores for a GMC!
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Steve Southworth
Sent: Saturday, 8 May 2010 11:14 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Holley Remanufactured Quadrajet Carbs
This makes Paterson's price appear reasonable considering it then will be,
for sure, the correct Qjet for the GMCMH.
http://www.carburetion.com/Restoration.asp
--
Steve Southworth
1974 Glacier TZE064V100150
Palmyra WI
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #83638 is a reply to message #83635] |
Sat, 08 May 2010 10:40 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Any of you fuel injection guys out there want to part with their old correct carb?
I'm looking at over $600 all said and done. Fuel Injection kit is looking good to me right now...
What's funny, is this carb actually works pretty good considering the accel pumps are crap.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #83641 is a reply to message #83638] |
Sat, 08 May 2010 11:05 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
Chr$ wrote on Sat, 08 May 2010 10:40 | Any of you fuel injection guys out there want to part with their old correct carb?
I'm looking at over $600 all said and done. Fuel Injection kit is looking good to me right now...
What's funny, is this carb actually works pretty good considering the accel pumps are crap.
|
So just get a parts kit and replace/repair the accel pumps. Those parts are part of the Qjet overhaul kits. It's not that hard to rework a Qjet.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #83653 is a reply to message #65189] |
Sat, 08 May 2010 12:26 |
jknezek
Messages: 1057 Registered: December 2007
Karma: 5
|
Senior Member |
|
|
Do to a bad rebuild my motorhome carb was shot and useless as a core. I'm using part of my old carb, part of a 454 carb, and the coach runs much better than it ever has. While I would love a motorhome carb and have posted for one on the flea market area, I don't think not having one is all that big a deal. You can also contact Joe Mondello. At Eastern States he said he had carbs that would work just fine for a motorhome 455. I think he wanted $250-$300 with no exchange needed. It's nice to squeeze as much performance as you can from these old babies, but it's probably not that necessary for most people...
Thanks,
Jeremy Knezek
1976 Glenbrook
Birmingham, AL
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #83665 is a reply to message #83653] |
Sat, 08 May 2010 14:18 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Yeah, I may do just that for now. The other half wants to get me fuel injection for Fathers day.
jknezek wrote on Sat, 08 May 2010 10:26 | Do to a bad rebuild my motorhome carb was shot and useless as a core. I'm using part of my old carb, part of a 454 carb, and the coach runs much better than it ever has. While I would love a motorhome carb and have posted for one on the flea market area, I don't think not having one is all that big a deal. You can also contact Joe Mondello. At Eastern States he said he had carbs that would work just fine for a motorhome 455. I think he wanted $250-$300 with no exchange needed. It's nice to squeeze as much performance as you can from these old babies, but it's probably not that necessary for most people...
|
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|
|
|
|
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #192944 is a reply to message #65189] |
Fri, 14 December 2012 09:55 |
petemosss
Messages: 221 Registered: August 2008 Location: Jacksonville, Florida
Karma: 0
|
Senior Member |
|
|
@Robert- Was it a spread-bore 4175? (I know of a torker/standard-bore attempt that was a disaster.)
Folks, I am simply trying to open conversation to steer things the way the airbag situation went. One Source-Many source. There are 4-5 of us on this single post that don't have that magically #'rd carb to route through Dick's Carb mecca. Wish I did, but I don't so $2000 or $260? I am still counting change to save for airbags,wheels and tires
Pete
74 Canyon Lands 26' "Emery"
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #192945 is a reply to message #192944] |
Fri, 14 December 2012 10:04 |
k2gkk
Messages: 4452 Registered: November 2009
Karma: -8
|
Senior Member |
|
|
My own "progress" so far:
Tires: Discount Tire in New Braunfels, TX where I picked up my coach in May 2010.
Shocks and brakes: Local frame shop in Oklahoma City, 2011.
Airbags: Sullybilt at Shawnee convention/rally in Mar 2012.
Wheels: XD-775 Rock Stars (chrome) at Discount Tire 4 miles up the road, spread
over 3 months (2 wheels per month) in Summer 2012.
Set priorities (safety first) and spread out the spending!
Still need work on fuel hoses, but beyond my DIY capabilties. Major fuel leak
HAS been eliminated.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
~ ~ ~ '76 ex-Palm Beach ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
______________
*[ ]~~~[][ ][|\
*--OO--[]---O-*
> To: gmclist@temp.gmcnet.org
> From: petemossss@gmail.com
> Date: Fri, 14 Dec 2012 09:55:13 -0600
> Subject: Re: [GMCnet] Holley Remanufactured Quadrajet Carbs
>
> @Robert- Was it a spread-bore 4175? (I know of a torker/standard-bore attempt that was a disaster.)
>
> Folks, I am simply trying to open conversation to steer things the way the airbag situation went. One Source-Many source. There are 4-5 of us on this single post that don't have that magically #'rd carb to route through Dick's Carb mecca. Wish I did, but I don't so $2000 or $260? I am still counting change to save for airbags,wheels and tires
> --
> Pete
> 74 Canyon Lands 26' "Emery"
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #192946 is a reply to message #192945] |
Fri, 14 December 2012 10:13 |
tphipps
Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
The difference between the butchered Q-Jet that was on my 455, butchered so bad the vacuum pot to open the secondaries was removed and a screw put in the port. to the Dick Patterson Carb was between night and day. Dick looked at the bad carb, and did not even hazard a guess where it came from, but it was not acceptable as a core.
Settle for the best, get a Patterson.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #192949 is a reply to message #192890] |
Fri, 14 December 2012 11:24 |
Jim Bounds
Messages: 842 Registered: January 2004
Karma: 0
|
Senior Member |
|
|
I have had experience with the Holly carbs enough to feel they do not work well for the GMC, you would usually need to build a dog house and in the end really, the perform is not there. A "new" carb also would probably not offer the best performance for the GMC. The remanufacture we do and I also know Dick Pattersons is a well filled with unique things specifically tuning the carb for use in the GMC. Among other things, we change things like the powen valve setting from dumping buckets of fuel. There are other special things that a "new" carb or a carb put together in a generic fashion would not have.
Your best bet is to send us or Dick your original carb and have it remanufactured itself. That way you know where the beast came from, it's "trauma" and you know it is what you had. Exchanging carbs is not a good thing to do at least in our application.
And as far as the thread about FI or carb-- most of you know I do not FI-- did it and vowed never again. Hey, it's one of those things like tire brands, oils and fuel you like-- everyone has an opinion and if you wanna know which is best ask one of the people with an opinion and they will tell you which one to believe-- usually it will be their idea! I have never seen more mileage or over all performance pick up switching so why would I want to... Just how I feel...
Jim Bounds
----------------
________________________________
From: Rob Mueller <robmueller@iinet.net.au>
To: gmclist@temp.gmcnet.org
Sent: Thursday, December 13, 2012 5:06 PM
Subject: Re: [GMCnet] Holley Remanufactured Quadrajet Carbs
Pete,
When I bought Double Trouble it had a Holley on it. Ken Frey tuned it and it ran OK. However, I found performance at highway speeds
didn't meet my expectations so I got a rebuilt QJ from Dick Patterson. When I removed the Holley I discovered the reason the Holley
didn't perform as well. The Holley's secondaries are MUCH smaller than the QJ.
What was most interesting to me was when I fitted one of Dick's re-curved distributers the performance got even better!
Unfortunately I can't tell you anything about the mileage as I've never checked because there's nothing more I can do to the engine
(at reasonable cost) that will make the gas mileage any better. I drive at whatever the speed limit is: 60 - 65 - 70 - 75. If you
want to get good mileage drive at 55 - 60.
Or as Gene notes: Mileage in a GMC will be 8 - 10 mpg.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
PS - I sold that Holley at the Amana flea market for $25
-----Original Message-----
From: pete
I have plans to purchase one of these if my currently functional QJ(non-correct#)starts misbehaving. $260. new delivered from
Holley. 90 day warranty.
A couple of brave souls have this set up and have brazenly spoke up and have reported identical mpg to QJ. Secondary spring fine
tuning was all that was necessary, experimenting with power-valves etc. resulted in returning to out of box set up.
Any updates Holley lab rats?
http://www.ebay.com/itm/Holley-0-80555C-650CFM-Model-4175-Factory-Refurbished-/281032231386?hash=item416ed389da&item=281032231386&pt
=Motors_Car_Truck_Parts_Accessories&vxp=mtr
--
Pete
74 Canyon Lands 26' "Emery"
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Holley Remanufactured Quadrajet Carbs [message #192974 is a reply to message #192945] |
Fri, 14 December 2012 16:14 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
We carry Patterson's product and consider them the best, however for those
that want one that is less in cost we provide a unit that is rebuilt by a
local firm.
We have had larger firms Quote us on rebuilt units and when we received
them there were few things that did not work.
I agree with Ken, your wasting your time as there are many things on the
carb that is different like the throttle linkage connection, lower linkage
interferance with manifold,etc.
On Fri, Dec 14, 2012 at 8:04 AM, D C _Mac_ Macdonald <k2gkk@hotmail.com>wrote:
>
> My own "progress" so far:
>
> Tires: Discount Tire in New Braunfels, TX where I picked up my coach in
> May 2010.
>
> Shocks and brakes: Local frame shop in Oklahoma City, 2011.
>
> Airbags: Sullybilt at Shawnee convention/rally in Mar 2012.
>
> Wheels: XD-775 Rock Stars (chrome) at Discount Tire 4 miles up the road,
> spread
> over 3 months (2 wheels per month) in Summer 2012.
>
> Set priorities (safety first) and spread out the spending!
>
> Still need work on fuel hoses, but beyond my DIY capabilties. Major fuel
> leak
> HAS been eliminated.
>
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ~~ ~ D C "Mac" Macdonald ~ ~~
> ~ ~ Amateur Radio - K2GKK ~ ~
> ~ ~ USAF and FAA, Retired ~ ~
> ~ ~ ~ Oklahoma City, OK ~ ~ ~
> ~~ ~ ~ "The Money Pit" ~ ~ ~~
> ~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
> ~ ~ ~ '76 ex-Palm Beach ~ ~ ~
> ~ www.gmcmhphotos.com/okclb ~
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ______________
> *[ ]~~~[][ ][|\
> *--OO--[]---O-*
>
>
>
> > To: gmclist@temp.gmcnet.org
> > From: petemossss@gmail.com
> > Date: Fri, 14 Dec 2012 09:55:13 -0600
> > Subject: Re: [GMCnet] Holley Remanufactured Quadrajet Carbs
> >
> > @Robert- Was it a spread-bore 4175? (I know of a torker/standard-bore
> attempt that was a disaster.)
> >
> > Folks, I am simply trying to open conversation to steer things the way
> the airbag situation went. One Source-Many source. There are 4-5 of us on
> this single post that don't have that magically #'rd carb to route through
> Dick's Carb mecca. Wish I did, but I don't so $2000 or $260? I am still
> counting change to save for airbags,wheels and tires
> > --
> > Pete
> > 74 Canyon Lands 26' "Emery"
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Goto Forum:
Current Time: Tue Sep 24 05:30:34 CDT 2024
Total time taken to generate the page: 0.02975 seconds
|