GMCforum: GMCnet » Starting the OhNan

Home » Public Forums » GMCnet » Starting the OhNan

Show: Today's Messages :: Polls :: Message Navigator

Starting the OhNan [message #60859]

Tue, 20 October 2009 19:56

cbwoodsr

Messages: 1063
Registered: February 2004

Karma: 0

Senior Member

What should I do to get ready to start my OhNan that has been sitting for 3 yrs???
Pop plugs and spray something??
pull front panel and use socket/wrench to turn back and forth to lube up???

Thankx

CBWood
77 Kingslay
MWC OK
ONLINE PARTS PROGRAM
www.GMCMHParts.com

Report message to a moderator

Re: [GMCnet] Starting the OhNan [message #60862 is a reply to message #60859]

Tue, 20 October 2009 20:05

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

here go
http://gmcmotorhome.info/generator.html#sleeping

gene

On Tue, Oct 20, 2009 at 5:56 PM, Charles Wood <cbwoodsr@swbell.net> wrote:

>
>
> What should I do to get ready to start my OhNan that has been sitting for 3
> yrs???
> Pop plugs and spray something??
> pull front panel and use socket/wrench to turn back and forth to lube up???
>
> Thankx
> --
> CBWood
> 77 Kingslay
> MWC OK
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Starting the OhNan [message #60870 is a reply to message #60859]

Tue, 20 October 2009 20:42

Dennis S

Messages: 3046
Registered: November 2005

Karma: 2

Senior Member

Here's one by JimB at the COOP...

http://www.gmccoop.com/wake_up_your_onan.htm

Dennis Sexton

Germantown, TN

-----Original Message-----
From: Charles Wood <cbwoodsr@swbell.net>
To: gmclist@temp.gmcnet.org
Sent: Tue, Oct 20, 2009 7:56 pm
Subject: [GMCnet] Starting the OhNan

What should I do to get ready to start my OhNan that has been sitting for 3
rs???
op plugs and spray something??
ull front panel and use socket/wrench to turn back and forth to lube up???
Thankx
-
BWood
7 Kingslay
WC OK

______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Dennis S
73 Painted Desert 230
Memphis TN Metro

Report message to a moderator

Re: Starting the OhNan [message #61817 is a reply to message #60859]

Mon, 26 October 2009 18:53

cbwoodsr

Messages: 1063
Registered: February 2004

Karma: 0

Senior Member

Finally got it started...

Tried w/the 2 6-volts there that were 'fat' and lots of green/white stuff around..one clunk each time I tried to start it.
Knew they were junk and took them out & headed to Wally.
Got 2 24DC-6's (6-volt I thought) and hooked them up in series like before..
Primed it and punched the button.
It really spun fast and started up finally and ran ok, I surmised that the 2 24DC-6's were 12 volt batts! after I got finished, I unhooked the 2 twelves and took them back for 2 6-volts...So now, all I have to do is get wheels/tires and clean it up again...I had been worried that it had froze up while it had been parked at the wonderful rv-shop.
Life is good again...
now if I can just find out where the oil pressure sensor and water temp wires go to........

CBWood
77 Kingslay
MWC OK
ONLINE PARTS PROGRAM
www.GMCMHParts.com

Report message to a moderator

Previous Topic:	[GMCnet] Newbie Checks In
Next Topic:	[GMCnet] Water heater timer

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 02 09:41:34 CDT 2024

Total time taken to generate the page: 4.58030 seconds