GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Who wants to go to a trade show ?
Who wants to go to a trade show ? [message #60833] Tue, 20 October 2009 14:50 Go to next message
hertfordnc is currently offline  hertfordnc   United States
Messages: 1164
Registered: September 2009
Location: East NC
Karma: 0
Senior Member
I googled "RV trade show promoter" I found a list of shows, one name came up more than the others, i emailed him, he answered.

The exchange appears below. I hope someone can take this and run with it.

I hope someone is willing to potentially let a lot of strangers look at their coach.

I hope no one wants to kill me.



------------------ dave


Mr. Lynch,

I am a member of the GMC Motor home community. We were recently discussing ways to draw new blood and keep these old coaches alive.

Is there a mutually beneficial way for us to have a presence at an RV trade Show?

What if we identified a few really nice coaches to display and you could promote “Vintage Motorhome Demo Open House”

Perhaps with samples of GMC, Revcon, and Clark Cortez.

Perhaps that might attract people who would not otherwise come? Some will be attracted to our hobby and go looking for an old coach to restore and a bunch more will realize the work involved and move on to your mainstream vendors.

Either way, you’ll have more feet on the floor and more names on the mailing list.

Obviously, our little clubs would not have the money for the exhibitor fees but perhaps if the idea grew legs then a bunch of our small cottage vendors could pitch in.

I believe the community is organized enough to pull this off of someone like you offered the opportunity.

Look Forward To hearing from you.


Dave Silva

his repy- un edited- direct and to the point

ok... lets do it...

rules- 1)no units for sale
2)limited to 10 exhibitor badges per show
3)must move in when instructed
4)pay for electric when facility charges
5)limit 2 units per show
6)pictures of units or units must be approved by me prior to event

take a look at my website and tell me what rv shows you would like to be at... i have added montgomery, alabama, january 8-10 as well!

let me know asap!



Dave & Ellen Silva Hertford, NC 76 Birchaven, 1-ton and other stuff Currently planning the Great american Road Trip Summer 2021 It's gonna take a lot of Adderall to get this thing right.
Re: Who wants to go to a trade show ? [message #60843 is a reply to message #60833] Tue, 20 October 2009 16:44 Go to previous messageGo to next message
GeorgeRud is currently offline  GeorgeRud   United States
Messages: 1380
Registered: February 2007
Location: Chicago, IL
Karma: 0
Senior Member
Sounds like this would be a great way to promote the GMCs.

If the shows are like those up here in Chicago, you would have to be very careful of what the charges are for electricity, etc. Anyone who has ever exibited at McCormick Place should be able to give you stories!


George Rudawsky
Chicago, IL
75 Palm Beach
Re: Who wants to go to a trade show ? [message #60865 is a reply to message #60843] Tue, 20 October 2009 20:22 Go to previous messageGo to next message
Don A is currently offline  Don A   United States
Messages: 895
Registered: October 2008
Location: Dallas, TX
Karma: 0
Senior Member
Nice idea Dave.

What's his website to see upcoming locations?


Don Adams Dallas, TX
'76 26' Glenbrook, '90 Sidekick
rebuilt by R Archer, powered by J Bounds, Koba
[IMG]http://www.gmcmhphotos.com/photos/data/6109/G2.jpg[/IMG]
Re: Who wants to go to a trade show ? [message #60867 is a reply to message #60833] Tue, 20 October 2009 20:25 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
Dang, that is pretty neat. Maybe I could clean mine up and hit one of the shows. This sounds good to me. I am excited. Where is the guy's website so we can see where the shows are? At least my engine looks good and they can see it through the glass engine cover.
Dan
picking cotton


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Re: Who wants to go to a trade show ? [message #60898 is a reply to message #60843] Wed, 21 October 2009 00:23 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
GeorgeRud wrote on Tue, 20 October 2009 16:44

Sounds like this would be a great way to promote the GMCs.

If the shows are like those up here in Chicago, you would have to be very careful of what the charges are for electricity, etc. Anyone who has ever exibited at McCormick Place should be able to give you stories!


Yes and Do I have stories about McCormick Place. There are unions for everything. Do not wash a window on your display coach. That is the union painter's job. etc..etc...etc.


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: Who wants to go to a trade show ? [message #60900 is a reply to message #60865] Wed, 21 October 2009 00:44 Go to previous message
hertfordnc is currently offline  hertfordnc   United States
Messages: 1164
Registered: September 2009
Location: East NC
Karma: 0
Senior Member
Web site is here:

http://www.rvia.org/AM/customsource/INCL_Shows.cfm?section=local_shows&all=1

I think if someone is going to do this then perhaps a few people should get together with a plan for which coaches would be available, how many people would take demonstrator badges, etc.




Dave & Ellen Silva Hertford, NC 76 Birchaven, 1-ton and other stuff Currently planning the Great american Road Trip Summer 2021 It's gonna take a lot of Adderall to get this thing right.

[Updated on: Wed, 21 October 2009 00:46]

Report message to a moderator

Previous Topic: engine wiring harness
Next Topic: [GMCnet] Electro Level Conversion From I to II
Goto Forum:
  


Current Time: Fri Nov 01 02:35:11 CDT 2024

Total time taken to generate the page: 0.01311 seconds