| Parting out a '74 26 foot GMC [message #45496] |
Sat, 06 June 2009 12:47  |
Tin Gerbil
Messages: 236
Registered: October 2006
Location: Vancouver Island, B.C.
Karma: 0
|
Senior Member |
|
|
All USED parts from 1974 GMC 26' Priced in US Dollars
No Body or Glass Parts left.
One used black water tank, needs new galley fitting spun on can be fixed locally. $140 with new fitting.
4 burner Magic Chef stove top, $75 Range hood $25.
Tilt steering column with key, shift lever and turn signal stock with cruise control. $75
Heater motor with squirrel cage fan $50
Brake master cylinder, needs kit, Clean inside, $25
Brake Vacuum Booster $25
Hydraulic wiper motor, with arms and spindles $50
4 Caspro rear shocks, 3 years old, less than 10,000 miles. $100 for four.
Accelerator cable $20
Shift cable $30
Rear Cast Iron Shock Frame mount, $20
one forward galley/dinette window screen frame, two rear. $20 each
All parts in NANAIMO, B.C. Canada
Gordon
'74 Canyon Lands "Tin Gerbil"
Vancouver Island, B.C.
[Updated on: Sat, 22 August 2009 18:22] Report message to a moderator |
|
|
|
| Re: Parting out a '74 26 foot GMC [message #45533 is a reply to message #45496] |
Sat, 06 June 2009 21:49  |
 |
burtco99
Messages: 31
Registered: September 2007
Location: Montreal
Karma: 0
|
Member |
|
|
I need the sliding glass panel from the Large RH side window just ahead of the door, and the locks with keys for the main door and shore power access door.
I am also interested in the Sway bars if they are the add -on units for the rear wheels. Got any photos of them?
Are yuo willing to ship to Montreal?
Thanks,
Les
Les Burt
Montreal
1975 Eleganza 26ft
A work in Progress
[Updated on: Tue, 09 June 2009 23:59] Report message to a moderator |
|
|
|
|
|
| Re: Parting out a '74 26 foot GMC [message #45567 is a reply to message #45496] |
Sun, 07 June 2009 10:27 |
|
|
I would be interested in one of the cockpit window frames if the price is reasonable. I do not need the cross bar or any of the glass pieces.
Bill Brown - '77 Buckeye Cruiser
Coshocton OH
carguybill@sbcglobal.net
|
|
|
|
|
|
|
|
|
|
| Re: Parting out a '74 26 foot GMC [message #46071 is a reply to message #45496] |
Thu, 11 June 2009 17:26 |
Chr$
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
How's the tranny? You interested in selling the motor/tranny as a unit?
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|
|
|
|
|
| Re: Parting out a '74 26 foot GMC [message #46789 is a reply to message #45496] |
Thu, 18 June 2009 01:24 |
George Beckman
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma: 11
|
Senior Member |
|
|
Does it still have the City Inlet connection valve? 1601 Shurflow is the one I need. Comes in an has a 90 degree connector on the inside.
Thanks.
'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
|
|
|
|
| Re: Parting out a '74 26 foot GMC [message #47613 is a reply to message #45496] |
Fri, 26 June 2009 08:05 |
mdryan
Messages: 27
Registered: March 2008
Location: Seattle
Karma: 0
|
Junior Member |
|
|
Hello Gordon.
I'm interested in the following parts off your donor -
1. Genset door w/ hinges
2. 1 front alxe w/ cv joints
3. air bag
I live in Seattle and travel to Victoria and Nanaimo frequently for business.
Please let me know price and availability on these parts and we can arrange a meeting.
Thanks
Mark Ryan
photovolt@comcast.net
206.679.4888
Mark Ryan
1978 Kingsley
Pac. Northwest
|
|
|
|
|
|
| Re: Parting out a '74 26 foot GMC [message #48142 is a reply to message #45567] |
Tue, 30 June 2009 17:45 |
Tin Gerbil
Messages: 236
Registered: October 2006
Location: Vancouver Island, B.C.
Karma: 0
|
Senior Member |
|
|
Price is not reasonable. The windows are siliconed in and the screws holding them in, are rusty and stripped. They will require drilling out. Then you have the packing and shipping cost.
I just re-listed this body as free for the taking, not to have a summer job at $5.00 an hour. I am sorry, but life is short and then you die. Too many fish to catch and berries to pick.
I will delete the listing, soon.
Gordon
'74 Canyon Lands "Tin Gerbil"
Vancouver Island, B.C.
[Updated on: Tue, 30 June 2009 18:52] Report message to a moderator |
|
|
|
| Re: Parting out a '74 26 foot GMC [message #48143 is a reply to message #45902] |
Tue, 30 June 2009 17:57 |
Tin Gerbil
Messages: 236
Registered: October 2006
Location: Vancouver Island, B.C.
Karma: 0
|
Senior Member |
|
|
The motor is for sale for $3500 US. It has Edelbrock heads. It also has an aluminum intake manifold. I was told by the PO that is has less than 5,000 miles on it and then, at a later date, less than 10,000 miles.
I was also told by a 3rd party that the engine cost $9000. The coach will go 100 miles per hour as verified by GPS and steers hands off. Therefore I assume all of the information is BS.
It did start immediately after sitting for 2 years, and is the most quiet motor I have ever owned. It does have everything new from the tilt steering to the front wheels. All new shocks, air compressor, air lines, brake lines etc. I still call it a pig in a sack. If I blow my Winterfeldt engine, which I don't seem to be able to do, even at 80 MPH and pulling hills WOT, I will use this engine without touching it.
Gordon
'74 Canyon Lands "Tin Gerbil"
Vancouver Island, B.C.
|
|
|
|
|
|
|
|
|
|
| Re: Parting out a '74 26 foot GMC [message #48153 is a reply to message #47613] |
Tue, 30 June 2009 18:07 |
Tin Gerbil
Messages: 236
Registered: October 2006
Location: Vancouver Island, B.C.
Karma: 0
|
Senior Member |
|
|
No air bag. I am keeping axles. Took off Generator door with hinges today. One small crack at one louver, $75. My '73 was cracked much worse in 3 places and I fixed it with vinyl ester and glass mat.
Gordon
'74 Canyon Lands "Tin Gerbil"
Vancouver Island, B.C.
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
