Home » Public Forums » GMCnet » [GMCnet] GMC Parts For Sale
|
|
|
Re: [GMCnet] GMC Parts For Sale [message #34095 is a reply to message #34089] |
Sat, 31 January 2009 18:22 |
|
That's right, Ken. He has spent a fortune on those parts.
It was a long project. They decided to build a new house. Other
things came along. The back burner finally went out.
He traveled to Pennsylvania to get the correct iron for side
frames. Had them sheared and broke to his specifications. I'll bet
he's got $15k in the frame alone.
bdub
At 05:31 PM 1/31/2009, Ken Henderson wrote:
>Wow! What an investment of time and money, only to abandon the project. :-(
>
>-----Original Message-----
>There's some bargains to be had here if you're in the market.
>
>www.gmcclassics.com/reed_parts/
>
>I've seen Ed's work. It is immaculate.
_______________________________________________
GMCnet mailing list
Gmclist@temp.gmcnet.org
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
bdub
bdub.net
|
|
|
Re: [GMCnet] GMC Parts For Sale [message #34097 is a reply to message #34079] |
Sat, 31 January 2009 19:35 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Bummer, no T-Skirts or rear molded plastic headliner. I know how that back burner tends to flicker a bit...
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
Re: [GMCnet] GMC parts for sale [message #110585 is a reply to message #34079] |
Sun, 02 January 2011 17:02 |
Gerald Wheeler
Messages: 152 Registered: February 2004
Karma: 0
|
Senior Member |
|
|
Roger,
I am not the one that posted parts for sale recently, but I have the
following NEW & NEVER INSTALLED items I am selling for my deceased
friend's wife. PE me for inquires and pictures.
$200 monitoring panel by Custom Instrument Panels; has AC & DC meters,
monitors two tanks, battery, water, etc, has generator hour meter and
stop/start switch, purchased in 2000 for over $300.
$275 fiberglass windshield one piece sunvisor, original price $375
$350 Thetford Aria china toilet with seat, in original packaging, push
button flush, original price $493.
$300 Packmaster storage pod, 30x60x15, parchment (off white) color,
original price $400+.
$20 GMC 2" receiver plug, original price $35.
$300 complete set (6) of Caspro shocks, still in shipping box, original
price $450.
$200 complete set (4) of rear Caspro shocks, still in shipping box,
original price $300.
$25 Ragusa bag rod, RV26, original price $42.
$12 Ragusa door grab bar, original price $28.
$200 Hadley Bully air horn kit, #H00981EA, 133 db, includes compressor,
wiring, tank, etc, lowest price I could find was $288.
$500 set of Clasco overhead cabinets, 5 in all, made in 1999 of 6 ply
plywood, laminated brown finish, cost over $2000.
$9995 1977 Birchaven rear bath, 7 Alcoa wheels with 245/75 R16 E tires,
equipped with factory buddy seat and has round wheel flares, new water
pump, new propane/electric water heater, transfer switch; tires are five
years old but have less than 1000 miles on them, they were either covered
when outside or in a cement floored garage.
I will be hitting the road on January 11th. If anyone is interested in
any of these items, get up with me ASAP. Otherwise, I'll be listing these
again around the first of April. I can also deliver these products to the
Bean Station rally in early May, 2011.
JR Wheeler NC/OR
> [Original Message]
> From: Roger Hartman <rdhhd1984@yahoo.com>
> To: <gmclist@temp.gmcnet.org>
> Date: 1/2/2011 4:21:36 PM
> Subject: Re: [GMCnet] GMC parts for sale
>
>
>
> Cannot reach you thru e-mail address listed. Am interested in some items
for sale especially the shocks. What do you have left, or what have you
sold, whichever list is shorter? Thanks
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GMC parts for sale [message #110590 is a reply to message #110585] |
Sun, 02 January 2011 17:59 |
Wesley Chalk
Messages: 35 Registered: September 2008
Karma: 0
|
Member |
|
|
where are you located?
Wesley Chalk
________________________________
From: Gerald Wheeler <jrwheeler7@earthlink.net>
To: gmclist@temp.gmcnet.org
Sent: Sun, January 2, 2011 5:02:31 PM
Subject: Re: [GMCnet] GMC parts for sale
Roger,
I am not the one that posted parts for sale recently, but I have the
following NEW & NEVER INSTALLED items I am selling for my deceased
friend's wife. PE me for inquires and pictures.
$200 monitoring panel by Custom Instrument Panels; has AC & DC meters,
monitors two tanks, battery, water, etc, has generator hour meter and
stop/start switch, purchased in 2000 for over $300.
$275 fiberglass windshield one piece sunvisor, original price $375
$350 Thetford Aria china toilet with seat, in original packaging, push
button flush, original price $493.
$300 Packmaster storage pod, 30x60x15, parchment (off white) color,
original price $400+.
$20 GMC 2" receiver plug, original price $35.
$300 complete set (6) of Caspro shocks, still in shipping box, original
price $450.
$200 complete set (4) of rear Caspro shocks, still in shipping box,
original price $300.
$25 Ragusa bag rod, RV26, original price $42.
$12 Ragusa door grab bar, original price $28.
$200 Hadley Bully air horn kit, #H00981EA, 133 db, includes compressor,
wiring, tank, etc, lowest price I could find was $288.
$500 set of Clasco overhead cabinets, 5 in all, made in 1999 of 6 ply
plywood, laminated brown finish, cost over $2000.
$9995 1977 Birchaven rear bath, 7 Alcoa wheels with 245/75 R16 E tires,
equipped with factory buddy seat and has round wheel flares, new water
pump, new propane/electric water heater, transfer switch; tires are five
years old but have less than 1000 miles on them, they were either covered
when outside or in a cement floored garage.
I will be hitting the road on January 11th. If anyone is interested in
any of these items, get up with me ASAP. Otherwise, I'll be listing these
again around the first of April. I can also deliver these products to the
Bean Station rally in early May, 2011.
JR Wheeler NC/OR
> [Original Message]
> From: Roger Hartman <rdhhd1984@yahoo.com>
> To: <gmclist@temp.gmcnet.org>
> Date: 1/2/2011 4:21:36 PM
> Subject: Re: [GMCnet] GMC parts for sale
>
>
>
> Cannot reach you thru e-mail address listed. Am interested in some items
for sale especially the shocks. What do you have left, or what have you
sold, whichever list is shorter? Thanks
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
Re: [GMCnet] GMC parts for sale [message #110733 is a reply to message #34079] |
Mon, 03 January 2011 20:10 |
George Zhookoff
Messages: 398 Registered: December 2004 Location: Snellville, GA
Karma: 6
|
Senior Member |
|
|
Jr,
I'll take the Hadley Bully air horn kit if stil available.
George Zhookoff
78 EL II
Atlanta
----- Original Message -----
From: gmclist-bounces@temp.gmcnet.org <gmclist-bounces@temp.gmcnet.org>
To: gmclist@temp.gmcnet.org <gmclist@temp.gmcnet.org>
Sent: Sun Jan 02 18:02:31 2011
Subject: Re: [GMCnet] GMC parts for sale
Roger,
I am not the one that posted parts for sale recently, but I have the
following NEW & NEVER INSTALLED items I am selling for my deceased
friend's wife. PE me for inquires and pictures.
$200 monitoring panel by Custom Instrument Panels; has AC & DC meters,
monitors two tanks, battery, water, etc, has generator hour meter and
stop/start switch, purchased in 2000 for over $300.
$275 fiberglass windshield one piece sunvisor, original price $375
$350 Thetford Aria china toilet with seat, in original packaging, push
button flush, original price $493.
$300 Packmaster storage pod, 30x60x15, parchment (off white) color,
original price $400+.
$20 GMC 2" receiver plug, original price $35.
$300 complete set (6) of Caspro shocks, still in shipping box, original
price $450.
$200 complete set (4) of rear Caspro shocks, still in shipping box,
original price $300.
$25 Ragusa bag rod, RV26, original price $42.
$12 Ragusa door grab bar, original price $28.
$200 Hadley Bully air horn kit, #H00981EA, 133 db, includes compressor,
wiring, tank, etc, lowest price I could find was $288.
$500 set of Clasco overhead cabinets, 5 in all, made in 1999 of 6 ply
plywood, laminated brown finish, cost over $2000.
$9995 1977 Birchaven rear bath, 7 Alcoa wheels with 245/75 R16 E tires,
equipped with factory buddy seat and has round wheel flares, new water
pump, new propane/electric water heater, transfer switch; tires are five
years old but have less than 1000 miles on them, they were either covered
when outside or in a cement floored garage.
I will be hitting the road on January 11th. If anyone is interested in
any of these items, get up with me ASAP. Otherwise, I'll be listing these
again around the first of April. I can also deliver these products to the
Bean Station rally in early May, 2011.
JR Wheeler NC/OR
> [Original Message]
> From: Roger Hartman <rdhhd1984@yahoo.com>
> To: <gmclist@temp.gmcnet.org>
> Date: 1/2/2011 4:21:36 PM
> Subject: Re: [GMCnet] GMC parts for sale
>
>
>
> Cannot reach you thru e-mail address listed. Am interested in some items
for sale especially the shocks. What do you have left, or what have you
sold, whichever list is shorter? Thanks
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GMC Parts For Sale [message #111169 is a reply to message #34079] |
Thu, 06 January 2011 23:17 |
Firefly
Messages: 98 Registered: May 2008 Location: Augusta, Maine
Karma: 0
|
Member |
|
|
This was a very old (1 year+/-) that I was able to take advantage of in buying two pristine 2nd-gen wheel well shrouds. Dick crated them up at work and shipped them to Orlando - very professional. I only wish I had the opportunity to get the cold-galvanized stretch frame he had made.
Mark Scoble, Lunenburg, MA - 1973 23' Palm Beach Stretched to 32' and in residence at the GMC Co-Op in Orlando, FL
|
|
|
Goto Forum:
Current Time: Fri Sep 27 12:17:55 CDT 2024
Total time taken to generate the page: 0.02445 seconds
|