Cracked exhaust manifold [message #368977] |
Sat, 05 March 2022 17:05 |
Ken M
Messages: 32 Registered: December 2019 Location: Redding, CA
Karma: 0
|
Member |
|
|
I’m guessing this is the infamous cracked exhaust manifold? I had an exhaust leak that I was hoping was a blown out gasket… I bet this was the issue?!?! Hmm… replacement factory manifold or headers???
1975 - 26’ Eleganza II
Unsure of what upgrades may have been done. I'm working on sorting that out in the coming months.
Ken Morefield - Redding, CA
|
|
|
|
Re: Cracked exhaust manifold [message #368988 is a reply to message #368977] |
Sun, 06 March 2022 09:26 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Replacement from Sirum or Cinnabar would be the least expensive and easiest way to go. Bolts in without a lot of hassle. Given the crack across the sealing surface,I'd get a set of the copper gaskets to seal if there's a minor dig in the port.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|