GMCforum: GMCnet » [GMCnet] Cam timing for 455

Home » Public Forums » GMCnet » [GMCnet] Cam timing for 455

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Cam timing for 455 [message #367178]

Tue, 12 October 2021 14:24

stu@97381.com, Emery

Messages: 232
Registered: June 2020

Karma: 2

Senior Member

What are the current suggestions for cam timing for a 455?

I have a 3.55 final drive and a switch pitch transmission.

Emery Stora
emerystora@mac.com

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

Report message to a moderator

[GMCnet] Re: Cam timing for 455 [message #367181 is a reply to message #367178]

Tue, 12 October 2021 16:21

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

Advance the cam 2-3 degrees to gain low end torque.

On Tue, Oct 12, 2021 at 12:24 PM Emery Stora via Gmclist <
gmclist@list.gmcnet.org> wrote:

> What are the current suggestions for cam timing for a 455?
>
> I have a 3.55 final drive and a switch pitch transmission.
>
> Emery Stora
> emerystora@mac.com
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Previous Topic:	Winterizing options
Next Topic:	[GMCnet] Sway bar bushings

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 22 17:33:50 CDT 2024

Total time taken to generate the page: 0.00728 seconds