Front rubber brake line length? [message #365096] |
Mon, 28 June 2021 23:18 |
Green machine
Messages: 184 Registered: July 2019 Location: North Vancouver BC
Karma: 5
|
Senior Member |
|
|
After my maiden voyage was delayed due to brake related issues, I've decided to replace the whole system.
New MC, ni-copp lines, prop valve and rubber flex lines. I already replaced the entire rear drum setup with kits (wheel cylinders, springs, pads etc.) and have new rear flex lines on the way.
The only thing left untouched will be the front rubber flex lines.
Does anyone know the length of these guys? I can remove mine and measure but figured someone must know.
TIA
Shawn
Shawn Harris
North Vancouver,
Canada
1977 Palm Beach 403
[Updated on: Mon, 28 June 2021 23:42] Report message to a moderator
|
|
|
[GMCnet] Re: Front rubber brake line length? [message #365123 is a reply to message #365096] |
Tue, 29 June 2021 14:04 |
powwerjon
Messages: 849 Registered: March 2013
Karma: -2
|
Senior Member |
|
|
70 or 80MM calipers?
J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 29.5’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan
> On Jun 29, 2021, at 12:18 AM, Shawn Harris wrote:
>
> After my maiden voyage was delayed due to brake related issues, I've decided to replace the whole system.
>
> New MC, ni-copp lines, prop valve and rubber flex lines. I already replaced the entire rear drum setup with kits (wheel cylinders, springs, pads etc.)
> and have new rear flex lines on the way.
>
> The only thing left untouched will be the front rubber flex lines.
>
> Does anyone know the length of these guys? I can remove mine and measure figured some must know.
>
> TIA
>
> Shawn
> --
> Shawn Harris
> North Vancouver,
> Canada
> 1977 Palm Beach 403
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|