| Phase 2 disc brakes from Applied [message #363971] |
Wed, 12 May 2021 18:51  |
Tom Katzenberger
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Guys,
I am installing the Phase II disc brake kit from applied. The instruction state that the caliper should be located at the 12:00 position on the rear wheels, but the brackets will only get me to the 1:30 position (front rear wheel) and 10:30 position (Rear wheel) with still leaving the caliper bleed valve at the top position.
Do I have older brackets? Is it only the Manny system that has the calipers at the 3:00 and 9:00 front rear boggie arm and rear boggie arm respectively?
Also, can anyone confirm the disc brake bracket goes on the outside of the boggie arm (axle side) and the trutrack mount goes on the inside of the boggie arm (behind the boggie arm and axle).
Is there a location I can find a photo?
Thanks for any help.
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
| [GMCnet] Re: Phase 2 disc brakes from Applied [message #363972 is a reply to message #363971] |
Wed, 12 May 2021 19:46  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Tom,
You undi one boilt holding the caliper and rotate it to the position where
it will have the maximum bleed and bleed, then mount it.
On Wed, May 12, 2021 at 4:51 PM wrote:
> Guys,
>
> I am installing the Phase II disc brake kit from applied. The instruction
> state that the caliper should be located at the 12:00 position on the rear
> wheels, but the brackets will only get me to the 1:30 position (front rear
> wheel) and 10:30 position (Rear wheel) with still leaving the caliper bleed
> valve at the top position.
>
> Do I have older brackets? Is it only the Manny system that has the
> calipers at the 3:00 and 9:00 front rear boggie arm and rear boggie arm
> respectively?
>
> Also, can anyone confirm the disc brake bracket goes on the outside of the
> boggie arm (axle side) and the trutrack mount goes on the inside of the
> boggie arm (behind the boggie arm and axle).
>
> Is there a location I can find a photo?
>
> Thanks for any help.
>
> Tom
> --
> Tom & Oki Katzenberger,
> Kingsville, Maryland,
> 1977 23' Birchaven, 455 C.I.D.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: Phase 2 disc brakes from Applied [message #363977 is a reply to message #363971] |
Thu, 13 May 2021 16:04 |
Tom Katzenberger
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Thank you Jim, Will do.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
| [GMCnet] Re: Phase 2 disc brakes from Applied [message #363978 is a reply to message #363977] |
Thu, 13 May 2021 17:32 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Our new design is clocked so one can bleed it in place.
On Thu, May 13, 2021 at 2:05 PM wrote:
> Thank you Jim, Will do.
> --
> Tom & Oki Katzenberger,
> Kingsville, Maryland,
> 1977 23' Birchaven, 455 C.I.D.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
