| [GMCnet] Header Gaskets [message #363828] |
Wed, 05 May 2021 14:02  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Here's an interesting link I stumbled across:
Which header gasket should I buy? (summitracing.com)
Ken H.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Header Gaskets [message #363834 is a reply to message #363828] |
Wed, 05 May 2021 20:57  |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Ken Henderson wrote on Wed, 05 May 2021 15:02Here's an interesting link I stumbled across:
Which header gasket should I buy? (summitracing.com)
Ken H.
Ken,
The link is missing, I was going to try to replace it, but doing a search on Summit lead me to two different parts:
MS15141 at 15.99 is a roll pert core and punched with the tooling I had a McCord over 20 years ago. It was not a very good part. I tried to market a better one but was shot down when I proposed it because there was not the market volume to justify the new tooling required.
21211 at 1,579.00 Is probably a mistake. By the description, it is a multi-layer stainless.
So, I can't be any more help than that.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
| [GMCnet] Re: Header Gaskets [message #363836 is a reply to message #363834] |
Wed, 05 May 2021 21:45 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Let's try again:
Which header gasket should I buy? (summitracing.com)
If that doesn't work, or gets converted, enter the question shown into the
search box.
Ken H.
On Wed, May 5, 2021 at 9:57 PM Matt Colie wrote:
> Ken Henderson wrote on Wed, 05 May 2021 15:02
>> Here's an interesting link I stumbled across:
>> Which header gasket should I buy? (summitracing.com)
>>
>> Ken H.
>
> Ken,
>
> The link is missing, I was going to try to replace it, but doing a search
> on Summit lead me to two different parts:
> MS15141 at 15.99 is a roll pert core and punched with the tooling I had a
> McCord over 20 years ago. It was not a very good part. I tried to market a
> better one but was shot down when I proposed it because there was not the
> market volume to justify the new tooling required.
> 21211 at 1,579.00 Is probably a mistake. By the description, it is a
> multi-layer stainless.
> So, I can't be any more help than that.
>
> Matt
> --
> Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL,
> GMCES
> Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum
> Brakes with Applied Control Arms
> SE Michigan - Near DTW - Twixt A2 and Detroit
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
