GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Charcoal (Charcoal canister)
Charcoal [message #363339] Thu, 08 April 2021 21:03 Go to next message
thigh19 is currently offline  thigh19   United States
Messages: 92
Registered: July 2019
Location: Vancouver Wa
Karma: 1
Member
Been reading different threads on this subject, but am not getting an answer I understand, other than I need a new charcoal canister.
Little background. I went to fill my 73 Sequoia, slow fill, gurgle, gurgle, wait, gurgle, gurgle, then the attendant let me know I was putting gas on the ground. Popped the engine cover and I see the charcoal canister with fuel pouring out.
Hence, I need a charcoal canister? From what I’ve read, need a 2 port canister. Anything I should know or am I chasing rabbits?
Thanx
Thom High
73 Sequoia
Vancouver Washington

[Updated on: Thu, 08 April 2021 21:18]

Report message to a moderator

Re: Charcoal [message #363340 is a reply to message #363339] Thu, 08 April 2021 21:23 Go to previous messageGo to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member

It's more likely that you need a new fuel vapor separator:

https://www.gmcrvparts.com/ProductDetails.asp?ProductCode=GM12-001-16

No liquid fuel should be getting past this part to even get to the charcoal canister.


Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
[GMCnet] Re: HVAC [message #363341 is a reply to message #363339] Thu, 08 April 2021 21:16 Go to previous messageGo to next message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
Find a gas station with nozzles that work right. Yours did not cancel.
Jim Hupy
Salem, Oregon

On Thu, Apr 8, 2021, 7:04 PM Thom High wrote:

> Been reading different threads on this subject, but am not getting an
> answer I understand, other than I need a new charcoal canister.
> Little background. I went to fill my 73 Sequoia, slow fill, gurgle,
> gurgle, wait, gurgle, gurgle, then the attendant let me know I was putting
> gas on
> the ground. Popped the engine cover and I see the charcoal canister with
> fuel pouring out.
> Hence, I need a charcoal canister? From what I’ve read, need a 2 port
> canister. Anything I should know or am I chasing rabbits?
> Thanx
> Thom High
> 73 Sequoia
> Vancouver Washington
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
[GMCnet] Re: HVAC [message #363342 is a reply to message #363341] Thu, 08 April 2021 22:15 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
Thom,
The liquid is coming through the vent system.
Your vapor separator is not working , so it must be replaced,
The manifold vacuum purges the carbon canister and remove the gas off the
carbon and brought into the intake manifold.
We supply a lot of the Vapor Separators as they do get old and non
operative.

On Thu, Apr 8, 2021 at 7:16 PM James Hupy wrote:

> Find a gas station with nozzles that work right. Yours did not cancel.
> Jim Hupy
> Salem, Oregon
>
> On Thu, Apr 8, 2021, 7:04 PM Thom High wrote:
>
>> Been reading different threads on this subject, but am not getting an
>> answer I understand, other than I need a new charcoal canister.
>> Little background. I went to fill my 73 Sequoia, slow fill, gurgle,
>> gurgle, wait, gurgle, gurgle, then the attendant let me know I was
> putting
>> gas on
>> the ground. Popped the engine cover and I see the charcoal canister with
>> fuel pouring out.
>> Hence, I need a charcoal canister? From what I’ve read, need a 2 port
>> canister. Anything I should know or am I chasing rabbits?
>> Thanx
>> Thom High
>> 73 Sequoia
>> Vancouver Washington
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>


--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:


Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Re: Charcoal [message #363344 is a reply to message #363339] Fri, 09 April 2021 08:24 Go to previous messageGo to next message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
Senior Member
Once you replace the separator and surrounding hoses and get the system pulling Purge vacuum through the canister, (study vacuum diagrams) the canister charcoal will purge of liquid and vapor fuel and be good to go again. You probably should change the filter on the bottom of the canister as it may be from the 70s.

John Lebetski
Woodstock, IL
77 Eleganza II
[GMCnet] Re: Charcoal [message #363345 is a reply to message #363344] Fri, 09 April 2021 08:49 Go to previous messageGo to next message
Keith V is currently offline  Keith V   United States
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
Senior Member
I replaced mine with a junk yard option. I figured mine was 40 years old and been flooded multiple times, i doubt the charcoal was any good.
It is the same diameter, but taller. It also vents out the top so it doesnt have that filter on the bottom getting hit by the road spray.

Because Im me I put a valve in the purge line so it only purges at part throttle, based on ported vacuum, like a modern car.

I also hooked the vent line to the clean side of the air cleaner
________________________________
From: John R.Lebetski
Sent: Friday, April 9, 2021 8:24:18 AM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: Charcoal

Once you replace the separator and surrounding hoses and get the system pulling Purge vacuum through the canister, (study vacuum diagrams) the
canister charcoal will purge of liquid and vapor fuel and be good to go again. You probably should change the filter on the bottom of the canister as
it may be from the 70s.
--
John Lebetski
Woodstock, IL
77 Eleganza II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:



Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
Re: [GMCnet] Re: HVAC [message #363349 is a reply to message #363342] Fri, 09 April 2021 12:31 Go to previous messageGo to next message
thigh19 is currently offline  thigh19   United States
Messages: 92
Registered: July 2019
Location: Vancouver Wa
Karma: 1
Member
Where is the vapor separator?
Re: Charcoal [message #363351 is a reply to message #363339] Fri, 09 April 2021 12:51 Go to previous messageGo to next message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
Senior Member
Left rear wheel well area.

John Lebetski
Woodstock, IL
77 Eleganza II
[GMCnet] Re: HVAC [message #363352 is a reply to message #363349] Fri, 09 April 2021 12:42 Go to previous messageGo to next message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
Left side rear wheel well. 10:30 o'clock position as you face it. Several
fuel /purge lines in close proximity. Hard to miss..
Jim Hupy
Salem, Oregon


On Fri, Apr 9, 2021, 10:36 AM Thom High wrote:

> Where is the vapor separator?
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

[GMCnet] Re: HVAC [message #363353 is a reply to message #363352] Fri, 09 April 2021 16:47 Go to previous messageGo to next message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
Some early Corvettes used a similar part. Some guys here have used them to
replace failed gmc parts.
Jim Hupy
Salem,Oregon

On Fri, Apr 9, 2021, 10:42 AM James Hupy wrote:

> Left side rear wheel well. 10:30 o'clock position as you face it. Several
> fuel /purge lines in close proximity. Hard to miss..
> Jim Hupy
> Salem, Oregon
>
>
> On Fri, Apr 9, 2021, 10:36 AM Thom High wrote:
>
>> Where is the vapor separator?
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

Re: [GMCnet] Re: HVAC [message #363356 is a reply to message #363353] Fri, 09 April 2021 18:50 Go to previous messageGo to next message
Silvernort is currently offline  Silvernort   United States
Messages: 95
Registered: June 2019
Location: Rock Springs, WI
Karma: 0
Member
James Hupy wrote on Fri, 09 April 2021 16:47
Some early Corvettes used a similar part. Some guys here have used them to
replace failed gmc parts.
Jim Hupy
Salem,Oregon

:

Yeah, it's actually exactly the same part: from 70 to 74 corvette. Just google it, you'll find a source.

As to the charcoal canister, I found my 76 doesn't have one! Discovered that soon after buying it last year when I changed the oil and rechecked it after about 50 miles and found more oil than I put in! So I took off the gas cap and it was under pressure. Checked out the vent system and sure enough, the hose was blocked off and no canister. Haven't had a chance to address that yet so I have to keep the gas cap loose to prevent washing down my cylinders and contaminating the oil.

Cheers.


Shane Harvey 1973 26' "Packer Backer", 1976 Palm Beach, 1965 Dart
[GMCnet] Re: Charcoal [message #363360 is a reply to message #363351] Sat, 10 April 2021 09:33 Go to previous message
Keith V is currently offline  Keith V   United States
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
Senior Member
Pass side on my 75...
________________________________
From: John R.Lebetski
Sent: Friday, April 9, 2021 12:51:12 PM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: Charcoal

Left rear wheel well area.
--
John Lebetski
Woodstock, IL
77 Eleganza II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:



Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
Previous Topic: wonder where my NEG went
Next Topic: vintage air slimline photos
Goto Forum:
  


Current Time: Tue Nov 19 05:15:18 CST 2024

Total time taken to generate the page: 0.01745 seconds