Interior Window Trim Removal [message #362320] |
Wed, 10 February 2021 08:33 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Guys,
Are there any tricks or tools that I can use to remove the interior window trim? I would like to remove the windows before I have it painted.
Thanks again,
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Re: Interior Window Trim Removal [message #362321 is a reply to message #362320] |
Wed, 10 February 2021 09:55 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Bob,
Thank you for the information on not removing the Coachman windows. I will make sure they do a supreme job of taping.
I would still like to remove and paint the interior trim in high gloss with a flex additive. Is there any tip for the same?
Rhanks,
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
Re: Interior Window Trim Removal [message #362413 is a reply to message #362320] |
Mon, 15 February 2021 14:03 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Thank you John,
I think, based on your and others recommendations, I will use SEM on the Dash and trim as well.
Thank you for sharing your experience.
Take care,
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|