GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Entrance Door and frame replacement (Replacing Entrance Door and frame)
Entrance Door and frame replacement [message #359805] Mon, 26 October 2020 20:10 Go to next message
Tom Katzenberger is currently offline  Tom Katzenberger   United States
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma: 4
Senior Member
Hello all,

Does anyone have experience in removing and re-installing the entrance door and door frame. I have to replace a damaged door frame and replace it with a door and frame from a donor coach. I don't want to cause any damage to the replacement frame and am looking for some tips to avoid the same.

Thanks in advance,
Tom


Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
Re: [GMCnet] Entrance Door and frame replacement [message #359806 is a reply to message #359805] Mon, 26 October 2020 23:01 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
Being that it is all Aluminum, go see a truck repair shop as they have
experience.
Also contact Jim Bounds of Coop.


On Mon, Oct 26, 2020 at 6:11 PM tomkatz3--- via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Hello all,
>
> Does anyone have experience in removing and re-installing the entrance
> door and door frame. I have to replace a damaged door frame and replace it
> with
> a door and frame from a donor coach. I don't want to cause any damage to
> the replacement frame and am looking for some tips to avoid the same.
>
> Thanks in advance,
> Tom
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>


--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Re: [GMCnet] Entrance Door and frame replacement [message #359807 is a reply to message #359806] Mon, 26 October 2020 23:09 Go to previous messageGo to next message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
Bob D. Widened the door frames on 2 coaches. He knows the construction
details of those door frames quite well.
Jim Hupy
Salem, Oregon

On Mon, Oct 26, 2020, 9:02 PM Jim Kanomata via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Being that it is all Aluminum, go see a truck repair shop as they have
> experience.
> Also contact Jim Bounds of Coop.
>
>
> On Mon, Oct 26, 2020 at 6:11 PM tomkatz3--- via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Hello all,
>>
>> Does anyone have experience in removing and re-installing the entrance
>> door and door frame. I have to replace a damaged door frame and replace
> it
>> with
>> a door and frame from a donor coach. I don't want to cause any damage to
>> the replacement frame and am looking for some tips to avoid the same.
>>
>> Thanks in advance,
>> Tom
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] Entrance Door and frame replacement [message #359812 is a reply to message #359807] Tue, 27 October 2020 08:43 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   Canada
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
James Hupy wrote on Tue, 27 October 2020 00:09
Bob D. Widened the door frames on 2 coaches. He knows the construction
details of those door frames quite well.
Jim Hupy
Salem, Oregon
And Here is a Second vote for you to contact Bob Dunahugh. He does read this, but irregularly he does read email.
Bob Dunahugh <(numbers for one hundred and eight)yenko at Gmail dot com
Just hang on tight, he is still a fireball.

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
Re: Entrance Door and frame replacement [message #359821 is a reply to message #359805] Tue, 27 October 2020 12:47 Go to previous messageGo to next message
Tom Katzenberger is currently offline  Tom Katzenberger   United States
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma: 4
Senior Member
Guys,

Bob Help me over the phone 2 weeks ago. I will defiantly be calling him back. Thank you guys for the input.

Thanks,
Guys


Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
Re: [GMCnet] Entrance Door and frame replacement [message #359835 is a reply to message #359821] Tue, 27 October 2020 16:58 Go to previous messageGo to next message
Mike Kelley is currently offline  Mike Kelley   United States
Messages: 467
Registered: February 2017
Karma: -2
Senior Member
Tom K.:
I concur - Bob D. is your man!
Mike/the Corvair a holic

Sent from my iPhone

> On Oct 27, 2020, at 12:47 PM, tomkatz3--- via Gmclist wrote:
>
> Guys,
>
> Bob Help me over the phone 2 weeks ago. I will defiantly be calling him back. Thank you guys for the input.
>
> Thanks,
> Guys
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: Entrance Door and frame replacement [message #359836 is a reply to message #359805] Tue, 27 October 2020 17:35 Go to previous messageGo to next message
94nubble is currently offline  94nubble   United States
Messages: 275
Registered: July 2011
Location: Chesapeake VA
Karma: 3
Senior Member
I have repaired a couple of doors. PM sent.

Tom McManus
1977 Royale
Chesapeake VA
Re: Entrance Door and frame replacement [message #361332 is a reply to message #359805] Fri, 01 January 2021 14:33 Go to previous messageGo to next message
ROYALE 1977 is currently offline  ROYALE 1977   United States
Messages: 4
Registered: August 2020
Karma: -1
Junior Member
hello
did you find out about fixing the door?

maybe you can give some ideas....
frame and door is messup....
thx
Re: Entrance Door and frame replacement [message #361336 is a reply to message #359805] Fri, 01 January 2021 15:18 Go to previous message
Tom Katzenberger is currently offline  Tom Katzenberger   United States
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma: 4
Senior Member
I've learned it is easier to take the whole frame and door off a donor coach, But I have found another 1977 23' Birchaven with 8,000 original mile and have been spending all my available time upgrading the same to be my dream coach.

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
Previous Topic: [GMCnet] Broken down in MD.
Next Topic: [GMCnet] Wish everyone a Happy New Year. ( Got to be better than 2020 )
Goto Forum:
  


Current Time: Sat Oct 05 23:34:34 CDT 2024

Total time taken to generate the page: 0.00969 seconds