Propane refurbishing [message #359265] |
Thu, 08 October 2020 09:52 |
tgeiger
Messages: 518 Registered: February 2006 Location: kansas city
Karma: -1
|
Senior Member |
|
|
So I plan on switching my electric fridge out for a 2-way sometime this coming year and I thought I’d do a run thru on the propane tank and its lines to make sure they’re in good order. I started reading on this subject and read some guys replaced the lines with copper? Would this not need to be black pipe? Copper seems to be kinda soft and my concern is punctures, not to mention god forbid if a fire happened? Not real knowledgeable on this so need some guidance. My thought was to keep the existing piping in place and clean up the connections that might leak. Have not looked at the pipe configuration yet so may have missed something in my thought.
Thanks,
TG
Tom Geiger
76 Eleganza II
KCMO
|
|
|
Re: Propane refurbishing [message #359267 is a reply to message #359265] |
Thu, 08 October 2020 10:24 |
lqqkatjon
Messages: 2324 Registered: October 2010 Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
I am not sure what you are talking about.
from what I know- existing lines ARE copper. there is a couple pieces of rubber propane hose, but those transition and most of the system is copper.
copper is also what is generally used in even new RV's.
for your eleganza, I would guess you have some rubber for flex locations like between body and frame. but if you open up your stove top, there is a copper line there feeding the stove, as well as furnace.
my 75 palm beach, I used a copper line to feed the added LP fridge.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
|
Re: Propane refurbishing [message #359284 is a reply to message #359265] |
Thu, 08 October 2020 18:25 |
tgeiger
Messages: 518 Registered: February 2006 Location: kansas city
Karma: -1
|
Senior Member |
|
|
Ah, see I needed an education on that. If I find everything good and want to replace the rubber transition hose, is there anything better to replace them with or do I simply replace them with new rubber hose?
Thanks
Tom
Tom Geiger
76 Eleganza II
KCMO
|
|
|
Re: Propane refurbishing [message #359300 is a reply to message #359265] |
Thu, 08 October 2020 21:21 |
Rick Staples
Messages: 126 Registered: May 2014 Location: Johnstown, Colorado, USA
Karma: -1
|
Senior Member |
|
|
Remember, the pressure in our propane systems (after the regulator) is very low. Eleven (11) inches water column works out to about 0.4 psi, so no need for iron pipe.
HTH
Rick Staples
Rick Staples, '75 Eleganza, Johnstown, CO
"Advice is a dangerous gift, even from the Wise to the Wise, and all paths may run ill." -Tolkien
|
|
|
Re: Propane refurbishing [message #359304 is a reply to message #359265] |
Fri, 09 October 2020 06:28 |
tgeiger
Messages: 518 Registered: February 2006 Location: kansas city
Karma: -1
|
Senior Member |
|
|
Oh low pressure is a relief. Its been one of these items I know I needed to look at but was scared to. This is relieving my fear of working on it.
Thanks guys.
TG
Tom Geiger
76 Eleganza II
KCMO
|
|
|
Re: Propane refurbishing [message #359305 is a reply to message #359284] |
Fri, 09 October 2020 06:45 |
lqqkatjon
Messages: 2324 Registered: October 2010 Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
the rubber hose can be reproduced by a good propane/gas service company. We have one here in my town, but sometimes might be hard to find. took my hose in(the one between regulator and floor in propane compartment), and they built me a new one.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
|
Re: [GMCnet] Propane refurbishing [message #359319 is a reply to message #359317] |
Fri, 09 October 2020 09:52 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
When you start, be sure to replace the Pressure Regulator as the
original rubber inside is toast.
Also when you get ready to purchase the Refrigerator, we can quote you a
delivered price on a New one, not something that someone returned or
mising some parts.
We can also answer any question on fitting it in your coach.
On Fri, Oct 9, 2020 at 7:29 AM Sammy Williams via Gmclist <
gmclist@list.gmcnet.org> wrote:
> How many times do you use anything propane? If you can't think of to many
> times you'd use it, I d go electric.
>
>
>
>
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon
>>
> Virus-free.
> www.avast.com
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link
>>
>
>
> On Thu, Oct 8, 2020 at 9:53 AM tom geiger via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> So I plan on switching my electric fridge out for a 2-way sometime this
>> coming year and I thought I’d do a run thru on the propane tank and its
>> lines to make sure they’re in good order. I started reading on this
>> subject and read some guys replaced the lines with copper? Would this
> not
>> need
>> to be black pipe? Copper seems to be kinda soft and my concern is
>> punctures, not to mention god forbid if a fire happened? Not real
>> knowledgeable on
>> this so need some guidance. My thought was to keep the existing piping in
>> place and clean up the connections that might leak. Have not looked at
> the
>> pipe configuration yet so may have missed something in my thought.
>>
>> Thanks,
>> TG
>> --
>> Tom Geiger
>> 76 Eleganza II
>> KCMO
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon
>>
> Virus-free.
> www.avast.com
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link
>>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|