[GMCnet] Body Parts [message #358628] |
Mon, 14 September 2020 17:12 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
I had a conversation with Bob Dunahugh today. Among the topics was body
parts. He says he has good side panels and wheel well liners from their
coach which burned a few years back. Also the front end from wheel well to
wheel well below the windshield. He doesn't want to throw away those
irreplaceable parts so needs some unfortunate accident victim to adopt
them. Maybe some other below-the-beltline parts too, I'd guess.
Give him a call.
Ken H.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Body Parts [message #358632 is a reply to message #358628] |
Mon, 14 September 2020 17:49 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Ken,
Where about are the parts located. I have to drive my daughter to New Orleans from Baltimore, MD. I might be able to make it an out of the way stop on the way back?
Thanks,
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Re: [GMCnet] Body Parts [message #358639 is a reply to message #358632] |
Mon, 14 September 2020 18:34 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Tom,
Bob lives in Cedar Rapids, IA, so that would be a little detour. But you
can call him at 319 three ninety-three 84 forty to see if it's worth it.
Ken
On Mon, Sep 14, 2020 at 6:49 PM tomkatz3--- via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Ken,
>
> Where about are the parts located. I have to drive my daughter to New
> Orleans from Baltimore, MD. I might be able to make it an out of the way
> stop on
> the way back?
>
> Thanks,
> Tom
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Body Parts [message #358641 is a reply to message #358628] |
Mon, 14 September 2020 19:05 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Thank you Ken. It is a little too far for this trip. I very much appreciate your response.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Re: [GMCnet] Body Parts [message #358658 is a reply to message #358628] |
Tue, 15 September 2020 07:53 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Ballimer to Cedar Rapids is a pretty good ride. Worth it if he has a body panel and/or other parts you need.
--Johnny (ex Hoppie)
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|