GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Lessons learned
Re: [GMCnet] Lessons learned [message #356575] Thu, 09 July 2020 09:30 Go to next message
BobDunahugh is currently offline  BobDunahugh   United States
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
Senior Member
I reused that big O ring at the fuel tank sending unit. I've only reused that O ring once. That O ring looked PERFECT. I will never ever reuse one of those O rings again.
Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] Lessons learned [message #356577 is a reply to message #356575] Thu, 09 July 2020 10:26 Go to previous messageGo to next message
6cuda6 is currently offline  6cuda6   Canada
Messages: 975
Registered: June 2019
Karma: -6
Senior Member
Bob you should know rule #1....anything hard to get ahold of for a repair is going to be a problem if you dont replace it once removed and anything that you replace that is easy to get at you'll never have trouble with if you dont replace it....lol.

Rich Mondor, Brockville, ON 77 Hughes 2600
Re: [GMCnet] Lessons learned [message #356578 is a reply to message #356575] Thu, 09 July 2020 10:26 Go to previous messageGo to next message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
The Willamete Valley Street Rodders, of which I am a decades long member,
have a "Special Award" called the rubber hammer award given to members who
have earned it through some amusing, (sometimes very expensive) personal
mechanical blunder. Much peer ribbing usually accompanied by applause is
the order of the day.
Lots of fun.
Jim Hupy
Salem, Oregon

On Thu, Jul 9, 2020, 8:10 AM Fred Hudspeth via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Larry,
>
> There is an interesting feature "Repair Mistakes & Blunders" in the
> Rockauto.com newsletter https://www.rockauto.com/Newsletter/ "Tell us
> about
> your most infamous auto repair blunder or unconventional fix... Use your
> woe
> to help others avoid similar mistakes or share off-the-wall solutions that
> worked (at least for a while!)... The story will be credited using only
> your first name and your vague geographic location (state, province,
> country, continent, etc.) so you can remain semi-anonymous!"
>
> Your story below reminded me of some I have seen (and done myself!) in
> their
> newsletters.
>
> Fred
>
>
> Fred Hudspeth
> 1978 Royale (TZE 368V101335) - Tyler, TX
> 1982 Airstream Excella (motorhome) - Cooper Landing, Alaska
>
>
>
> Message: 1
> Date: Wed, 08 Jul 2020 18:04:24 -0600
> From: Larry
> To: gmclist@list.gmcnet.org
> Subject: [GMCnet] Lessons learned
> Message-ID:
> Content-Type: text/plain; charset="utf-8"
>
> I?ve had a minor fuel leak that started last winter while in Florida. Just
> enough to wet the front tank, front left corner. Noticed mostly after a
> fill
> and until the tank was less than 3/4 full. I got under there and spent
> several times with a flashlight trying to see where it was coming from, but
> unable to identify a specific spot. Finally concluded because of the
> location of the ?wetness? that it must be coming from somewhere on the top
> of the tank. So yesterday I decided to take the tank down. So, using the
> in
> tank pumps and breaking into one of the line connections behind the right
> front wheel, I pumped about 30 gallons of fuel into gas cans I had and
> borrowed from friends. All steel lines from the tank to the engine had to
> be
> disconnected at junction joints, electrical connections pulled apart and
> moved the macerator hose. One more thing to do before I loosened the bolts
> to drop the tank with my floor jack. Had to loosen the rubber filler hose
> that goes from the filler pipe to the tank. So I reached up in there to
> put
> a 5/16 socket on the hose clamp and the clamp spins on the filler
> hose??SH$T!!! After all of that draining fuel, and lowering prep, I
> tightened up the hose clamp and put it all back together. LEAK FIXED!!
>
> Lesson learned??? Double check everything.
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
>
>
> ***************************************
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] Lessons learned [message #356614 is a reply to message #356575] Fri, 10 July 2020 07:30 Go to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
Senior Member
There ain't enough hammers, rubber or otherwise, to cover the hard lessons I've learned on my GMCs. I like the idea though, maybe a recurring award from GMCMI?

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
Previous Topic: Throttle cable
Next Topic: Battery cable diagrams
Goto Forum:
  


Current Time: Sun Sep 22 03:51:54 CDT 2024

Total time taken to generate the page: 0.04101 seconds