Propane tank service valve [message #354997] |
Fri, 22 May 2020 11:24 |
6cuda6
Messages: 975 Registered: June 2019
Karma: -6
|
Senior Member |
|
|
Anyone replace or service the propane tank service valve on their rig? Mine has decided it needs to leak....
Rich Mondor,
Brockville, ON
77 Hughes 2600
|
|
|
Re: Propane tank service valve [message #355002 is a reply to message #354997] |
Fri, 22 May 2020 11:40 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
I think it is pretty common for those to leak during the process of turning them on and off. They don't seem to leak when all the way on, or all the way off. I guess if yours does, you should replace it or have a propane dealer replace it for you.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
Re: [GMCnet] Propane tank service valve [message #355026 is a reply to message #355002] |
Fri, 22 May 2020 19:19 |
powwerjon
Messages: 849 Registered: March 2013
Karma: -2
|
Senior Member |
|
|
As Carl says the LP valve does have a tendency to leak slightly when turning it on or off. It should be only in the fully open position or the fully closed position. The stops at either end act as seals for the shaft. If it leaks at either stop then you should have it replaced by an approved LP service/filling station.
J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 29.5’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan
> On May 22, 2020, at 12:40 PM, Carl Stouffer via Gmclist wrote:
>
> I think it is pretty common for those to leak during the process of turning them on and off. They don't seem to leak when all the way on, or all the
> way off. I guess if yours does, you should replace it or have a propane dealer replace it for you.
> --
> Carl Stouffer
> '75 ex Palm Beach
> Tucson, AZ.
> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles,
> Solar battery charging. GMCSJ and GMCMI member
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
Re: Propane tank service valve [message #355032 is a reply to message #354997] |
Fri, 22 May 2020 23:43 |
roy1
Messages: 2126 Registered: July 2004 Location: Minden nevada
Karma: 6
|
Senior Member |
|
|
If it leaks with the valve fully open I would open the windows and run the gas heater and stove top till the propane is used up unless the outside air temp is too hot. When the tank is empty replace the valve. You may need to have the air purged out when it is refilled. If you don’t feel comfortable emptying the tank a propane service company should be able to do it for you for a price.
Roy Keen
Minden,NV
76 X Glenbrook
|
|
|
Re: Propane tank service valve [message #355036 is a reply to message #354997] |
Sat, 23 May 2020 07:50 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
There are rebuild kits available for the valve, ask your propane dealer. There is also a tool for removing the valve without damage - it's brass and will deform if it's really tight and you use a regular wrench on it. Ask me how I know this. The new valve from Blossman Gas was #$35, the kit would have been under ten.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|