Home » Public Forums » GMCnet » [GMCnet] Original oven door
[GMCnet] Original oven door [message #354756] |
Sat, 16 May 2020 18:39 |
Burt and Faye curtis
Messages: 256 Registered: June 2012
Karma: 4
|
Senior Member |
|
|
I am having am ongoing problem with my original oven door. The right hinge
went hinky and though I can sometimes coax it kind of back into place, as
soon as it is opened again, it is out of wack, preventing it from closing.
Yeah, I know this is sort of an unclear description, but does anyone know
how to correctly fix this problem? Hate to discard a unit that is otherwise
working.
Thanks in advance,
Fay Curtis
'76 Glenbrook
Kneeland, CA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Original oven door [message #354757 is a reply to message #354756] |
Sat, 16 May 2020 18:46 |
Emery Stora
Messages: 959 Registered: January 2011
Karma: 4
|
Senior Member |
|
|
Hi Faye
I suspect that you have a loose bolt. If you remove the inner panel you can get to the hinge and see what is wrong. If you can’t fix it let me know. I might be ably to find a door for you.
Emery Stora
> On May 16, 2020, at 5:40 PM, Burt and Faye curtis via Gmclist wrote:
>
> I am having am ongoing problem with my original oven door. The right hinge
> went hinky and though I can sometimes coax it kind of back into place, as
> soon as it is opened again, it is out of wack, preventing it from closing.
> Yeah, I know this is sort of an unclear description, but does anyone know
> how to correctly fix this problem? Hate to discard a unit that is otherwise
> working.
> Thanks in advance,
>
> Fay Curtis
> '76 Glenbrook
> Kneeland, CA
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Original oven door [message #354758 is a reply to message #354757] |
Sat, 16 May 2020 18:50 |
Burt and Faye curtis
Messages: 256 Registered: June 2012
Karma: 4
|
Senior Member |
|
|
Emory,
How does that inner panel remove? Is it just the one side and can it be
done with the range in the coach or should I remove the unit for easier
access?
Thanks
Fay
On Sat, May 16, 2020 at 4:47 PM Emery Stora via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Hi Faye
> I suspect that you have a loose bolt. If you remove the inner panel you
> can get to the hinge and see what is wrong. If you can’t fix it let me
> know. I might be ably to find a door for you.
>
> Emery Stora
>
>> On May 16, 2020, at 5:40 PM, Burt and Faye curtis via Gmclist gmclist@list.gmcnet.org> wrote:
>>
>> I am having am ongoing problem with my original oven door. The right
> hinge
>> went hinky and though I can sometimes coax it kind of back into place, as
>> soon as it is opened again, it is out of wack, preventing it from
> closing.
>> Yeah, I know this is sort of an unclear description, but does anyone know
>> how to correctly fix this problem? Hate to discard a unit that is
> otherwise
>> working.
>> Thanks in advance,
>>
>> Fay Curtis
>> '76 Glenbrook
>> Kneeland, CA
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Original oven door [message #354761 is a reply to message #354758] |
Sat, 16 May 2020 19:15 |
k2gkk
Messages: 4452 Registered: November 2009
Karma: -8
|
Senior Member |
|
|
I would bet Jim K or Jim B would have a used door.
Mac Macdonald
Sent from my iPhone
On May 16, 2020, at 18:51, Burt and Faye curtis via Gmclist wrote:
Emory,
How does that inner panel remove? Is it just the one side and can it be
done with the range in the coach or should I remove the unit for easier
access?
Thanks
Fay
On Sat, May 16, 2020 at 4:47 PM Emery Stora via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Hi Faye
> I suspect that you have a loose bolt. If you remove the inner panel you
> can get to the hinge and see what is wrong. If you can’t fix it let me
> know. I might be ably to find a door for you.
>
> Emery Stora
>
>>> On May 16, 2020, at 5:40 PM, Burt and Faye curtis via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>> I am having am ongoing problem with my original oven door. The right
> hinge
>> went hinky and though I can sometimes coax it kind of back into place, as
>> soon as it is opened again, it is out of wack, preventing it from
> closing.
>> Yeah, I know this is sort of an unclear description, but does anyone know
>> how to correctly fix this problem? Hate to discard a unit that is
> otherwise
>> working.
>> Thanks in advance,
>>
>> Fay Curtis
>> '76 Glenbrook
>> Kneeland, CA
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Original oven door [message #354762 is a reply to message #354758] |
Sat, 16 May 2020 20:08 |
Emery Stora
Messages: 959 Registered: January 2011
Karma: 4
|
Senior Member |
|
|
I don’t have an oven like that anymore. Replaced with a microwave and top burners.
If I recall the door had an inner panel and an outer panel with a stainless channel around the outside.
There must be screws holding it together. You might have to take the dot off to get it apart.
Emery
> On May and 16, 2020, at 5:51 PM, Burt and Faye curtis via Gmclist wrote:
>
> Emory,
> How does that inner panel remove? Is it just the one side and can it be
> done with the range in the coach or should I remove the unit for easier
> access?
> Thanks
>
> Fay
>
>> On Sat, May 16, 2020 at 4:47 PM Emery Stora via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>> Hi Faye
>> I suspect that you have a loose bolt. If you remove the inner panel you
>> can get to the hinge and see what is wrong. If you can’t fix it let me
>> know. I might be ably to find a door for you.
>>
>> Emery Stora
>>
>>> On May 16, 2020, at 5:40 PM, Burt and Faye curtis via Gmclist > gmclist@list.gmcnet.org> wrote:
>>>
>>> I am having am ongoing problem with my original oven door. The right
>> hinge
>>> went hinky and though I can sometimes coax it kind of back into place, as
>>> soon as it is opened again, it is out of wack, preventing it from
>> closing.
>>> Yeah, I know this is sort of an unclear description, but does anyone know
>>> how to correctly fix this problem? Hate to discard a unit that is
>> otherwise
>>> working.
>>> Thanks in advance,
>>>
>>> Fay Curtis
>>> '76 Glenbrook
>>> Kneeland, CA
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Original oven door [message #354783 is a reply to message #354762] |
Sun, 17 May 2020 09:20 |
JohnS
Messages: 126 Registered: December 2014 Location: Vacaville, CA
Karma: -2
|
Senior Member |
|
|
Faye, I just looked at my 77 with original stove/oven. There are four screws, 2 top and 2 bottom on edge of the door. Removal of those should allow removal of the outer door panel and give access to the door part of the hinges. If the trouble is not on the door, the whole unit may need to come out.
John S.
John Shutzbaugh, Vacaville, CA, ncserv@aol.com;
78 Buskirk stretch, "What were we thinking?"
|
|
|
Re: [GMCnet] Original oven door [message #355120 is a reply to message #354783] |
Mon, 25 May 2020 19:21 |
Burt and Faye curtis
Messages: 256 Registered: June 2012
Karma: 4
|
Senior Member |
|
|
Ok, so I finally had a chance to look at the oven problem again. From what
I can determine, after looking online for help also, is that the spring
that holds the upper hinge bar into the side of the main body is no longer
attached. Has anyone ever played with this problem? Without removing the
unit, I can't seem to find a way to get to that spring.
Fay Curtis
'76 Glenbrook
Kneeland, CA
On Sun, May 17, 2020 at 7:21 AM John Shutzbaugh via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Faye, I just looked at my 77 with original stove/oven. There are four
> screws, 2 top and 2 bottom on edge of the door. Removal of those should
> allow
> removal of the outer door panel and give access to the door part of the
> hinges. If the trouble is not on the door, the whole unit may need to come
> out.
>
> John S.
> --
> John Shutzbaugh, Vacaville, CA, ncserv@aol.com;
> 77 Eleganza, bought it new, can't blame PO; and
> 78 Buskirk stretch, "What were we thinking?"
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Original oven door [message #355127 is a reply to message #355120] |
Tue, 26 May 2020 07:39 |
JohnS
Messages: 126 Registered: December 2014 Location: Vacaville, CA
Karma: -2
|
Senior Member |
|
|
I think it will need to come out. From what I remember, (it has been a long time) to get it out, raise the top panel, which hinges on the outboard side. Pull up pretty strongly on the inboard edge, it's a spring clip. That allows you to disconnect the gas. Then there are a couple of screws on each side (fore & aft) that go into the countertop. Then slide the unit inboard to remove. It may not need to come all the way out to access the hinges.
Good luck, John
John Shutzbaugh, Vacaville, CA, ncserv@aol.com;
78 Buskirk stretch, "What were we thinking?"
|
|
|
Re: [GMCnet] Original oven door [message #355134 is a reply to message #355127] |
Tue, 26 May 2020 08:34 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Faye,
There are screws around the unit that is easy to get to so sliding it out
is not a issue . Duscinne ct the LPG line
On Tue, May 26, 2020 at 5:40 AM John Shutzbaugh via Gmclist <
gmclist@list.gmcnet.org> wrote:
> I think it will need to come out. From what I remember, (it has been a
> long time) to get it out, raise the top panel, which hinges on the outboard
> side. Pull up pretty strongly on the inboard edge, it's a spring clip.
> That allows you to disconnect the gas. Then there are a couple of screws on
> each side (fore & aft) that go into the countertop. Then slide the unit
> inboard to remove. It may not need to come all the way out to access the
> hinges.
>
> Good luck, John
> --
> John Shutzbaugh, Vacaville, CA, ncserv@aol.com;
> 77 Eleganza, bought it new, can't blame PO; and
> 78 Buskirk stretch, "What were we thinking?"
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Goto Forum:
Current Time: Mon Sep 30 04:36:42 CDT 2024
Total time taken to generate the page: 0.01318 seconds
|