[GMCnet] resistance wire [message #354305] |
Thu, 30 April 2020 16:54 |
Hanson Email
Messages: 110 Registered: March 2020
Karma: -1
|
Senior Member |
|
|
My resistance wire that grounds my dash, goes along behind the glove box and
disappears into the fiberglass area on the passenger side, below the slide
window and into the area that houses the ash tray . Can anyone tell me where
that actually terminates? Want to make sure I don't disconnect that in my
endeavors.
TIA.
Dean Hanson 75 Avion
Fremont, Ca
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] resistance wire [message #354307 is a reply to message #354305] |
Thu, 30 April 2020 18:17 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
That is probbably not a resistance wire if it grounds the dash. If the wire you are asking about is connected to the plate that all of the dash instruments are mounted on, then the other end of that wire terminates at the aluminum plate up front on the passenger side that the isolator is mounted on.
Ken B.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|