|
|
|
Re: [GMCnet] reupholstering - need info [message #354192 is a reply to message #354169] |
Mon, 27 April 2020 14:58 |
Silvernort
Messages: 95 Registered: June 2019 Location: Rock Springs, WI
Karma: 0
|
Member |
|
|
One thing to watch out for is material for the welting - it takes a surprising amount. If you're using fabric with a pattern, it is usually better to cut the welting on the bias. Usually 45 degrees, but choose what looks best to you.
On a project I'm in the middle of now, the seats for a 65 Dart, the vinyl was really expensive so I fiqured the amount very tight. Too tight as it turned out and had no room for welting and had to go without. It's OK since I just couldn't pop for more of this 'special' vinyl, tho it would have been better. Just something to think about when planning your upholstery.
Cheers
Shane Harvey
1973 26' "Packer Backer", 1976 Palm Beach, 1965 Dart
|
|
|
|