Home » Public Forums » GMCnet » [GMCnet] Black List
| [GMCnet] Black List [message #347449] |
Fri, 06 September 2019 19:43  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Wow, did I get a shock just now! It's been years since I'd looked at the
Black List. What a list!!! 598 US entries and another 175 or so Canadian
ones! I don't know how many we had at my last visit, but nowhere near that
many! Thank all of you for "volunteering"!
Beyond that, I had a frustrating experience: I was going to pare the
spreadsheet to names & addresses only to make it easy to put them into a
Google map. That part went easy, and deleting the blank lines where state
names dropped out was only laborious. BUT, I was working in Open Office
rather than Excel. :-( When I attempted to save my work, I got a fatal
error and lost it all! :-((
Maybe I'll try again some day! Now I remember why I re-retired 25 years
ago!
Ken H.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Black List [message #347453 is a reply to message #347449] |
Fri, 06 September 2019 21:04  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Ken,
You thought you retired, but really you graduated to another one, non
paying job.
I’m glad your doing a banged up non paying job and staying healthy.
People like you are what keeps the GMC and the community rolling.
On Fri, Sep 6, 2019 at 5:45 PM Ken Henderson via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Wow, did I get a shock just now! It's been years since I'd looked at the
> Black List. What a list!!! 598 US entries and another 175 or so Canadian
> ones! I don't know how many we had at my last visit, but nowhere near that
> many! Thank all of you for "volunteering"!
>
> Beyond that, I had a frustrating experience: I was going to pare the
> spreadsheet to names & addresses only to make it easy to put them into a
> Google map. That part went easy, and deleting the blank lines where state
> names dropped out was only laborious. BUT, I was working in Open Office
> rather than Excel. :-( When I attempted to save my work, I got a fatal
> error and lost it all! :-((
>
> Maybe I'll try again some day! Now I remember why I re-retired 25 years
> ago!
>
> Ken H.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Black List [message #347457 is a reply to message #347449] |
Sat, 07 September 2019 00:27 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
OO stores a back up copy as you go along. It is done automatically every xx minutes. I forget where it is stored.
To save recovery information automatically every n minutes
1. Choose Tools - Options - Load/Save - General.
2. Mark Save AutoRecovery information every and select the time
interval.
Check and see if yours is turned on
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
| Re: [GMCnet] Black List [message #347460 is a reply to message #347457] |
Sat, 07 September 2019 06:52 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Thanks, Ken. It turns out that option WAS turned on -- by default
apparently, 'cause I never knew it was available. But there's no sign of a
backup of my work -- nor even that I ever opened the Black List! Strange.
Thanks anyway.
Ken H.
On Sat, Sep 7, 2019 at 1:28 AM Ken Burton via Gmclist <
gmclist@list.gmcnet.org> wrote:
> OO stores a back up copy as you go along. It is done automatically every
> xx minutes. I forget where it is stored.
>
> To save recovery information automatically every n minutes
> 1. Choose Tools - Options - Load/Save - General.
> 2. Mark Save AutoRecovery information every and select the time
> interval.
>
> Check and see if yours is turned on
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Black List [message #347461 is a reply to message #347459] |
Sat, 07 September 2019 06:59 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Thanks, Christo. I'd also found that broken link. I've got an OLD Black
List map; I don't know whether it's one I someone else generated, but
thought I'd make a new one.
Yep, I'm sure Kim's very busy. With all the publishing she's doing these
days, I don't see how she has time to even THINK about rallies...
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI & EBL,
Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
www.gmcwipersetc.com
On Sat, Sep 7, 2019 at 7:54 AM Christo Darsch via Gmclist <
gmclist@list.gmcnet.org> wrote:
> At https://www.gmcmi.com/black-list/ there's a link to BatchGEO that used
> to open a Google Map. It worked a few months ago but is broken now. I just
> sent an email to Kim Weeks, the admin for the site, to see if she can look
> into it when she gets a chance. I've heard she's very busy right now
> getting ready for the Mansfield convention.
>
> --
> Christo Darsch
> 1977 Eleganza II - "Komet"
> 3.50 Power Drive, Disc Brakes, Alcoas
> Weymouth, MA
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Black List [message #347479 is a reply to message #347449] |
Sat, 07 September 2019 13:17 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I know Kim is very busy right now so I just take whatever assignment she asks me to get done and do it without bothering her.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] Black List [message #347769 is a reply to message #347460] |
Fri, 13 September 2019 04:57 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Hey Colonel Sir, (Ken H.)
I finally found it. It is in a directory called "backups" and about 5 directories deep.
Open OO
Go to "tools"
Go to "options"
Go to "OpenOffice"
Go to "paths"
Go to "backups"
I found a .bak file for my current windshield spreadsheet there. Hopefully you will find yours there too. It only took me almost a week to find it.
Ken Henderson wrote on Sat, 07 September 2019 06:52Thanks, Ken. It turns out that option WAS turned on -- by default
apparently, 'cause I never knew it was available. But there's no sign of a
backup of my work -- nor even that I ever opened the Black List! Strange.
Thanks anyway.
Ken H.
On Sat, Sep 7, 2019 at 1:28 AM Ken Burton via Gmclist <
gmclist@list.gmcnet.org> wrote:
> OO stores a back up copy as you go along. It is done automatically every
> xx minutes. I forget where it is stored.
>
> To save recovery information automatically every n minutes
> 1. Choose Tools - Options - Load/Save - General.
> 2. Mark Save AutoRecovery information every and select the time
> interval.
>
> Check and see if yours is turned on
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] Black List [message #347770 is a reply to message #347769] |
Fri, 13 September 2019 05:09 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Ken,
Thanks a bunch for all your efforts! But, apparently I screwed up long ago
-- didn't set a backup location: When I followed your instructions, I
wound up with ".../backups" presenting me with a complete directory tree,
apparently to allow me to select a location for my *.bak files. Since I'd
never done that, OO didn't know where to put them -- and didn't. :-(
You'd think that after all these years we'd have learned to love computers
& software, wouldn't you? ...NOT!
Thanks anyway,
Ken H.
On Fri, Sep 13, 2019 at 5:57 AM Ken Burton via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Hey Colonel Sir, (Ken H.)
>
> I finally found it. It is in a directory called "backups" and about 5
> directories deep.
>
> Open OO
> Go to "tools"
> Go to "options"
> Go to "OpenOffice"
> Go to "paths"
> Go to "backups"
>
> I found a .bak file for my current windshield spreadsheet there.
> Hopefully you will find yours there too. It only took me almost a week to
> find it.
>
>
> Ken Henderson wrote on Sat, 07 September 2019 06:52
>> Thanks, Ken. It turns out that option WAS turned on -- by default
>> apparently, 'cause I never knew it was available. But there's no sign
> of a
>> backup of my work -- nor even that I ever opened the Black List!
> Strange.
>>
>> Thanks anyway.
>>
>> Ken H.
>>
>> On Sat, Sep 7, 2019 at 1:28 AM Ken Burton via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> OO stores a back up copy as you go along. It is done automatically
> every
>>> xx minutes. I forget where it is stored.
>>>
>>> To save recovery information automatically every n minutes
>>> 1. Choose Tools - Options - Load/Save - General.
>>> 2. Mark Save AutoRecovery information every and select the time
>>> interval.
>>>
>>> Check and see if yours is turned on
>>> --
>>> Ken Burton - N9KB
>>> 76 Palm Beach
>>> Hebron, Indiana
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
Goto Forum:
Current Time: Fri Sep 20 14:15:37 CDT 2024
Total time taken to generate the page: 0.09595 seconds
|
GMCforum
Search
Help
Register
Login
Home
