| Clips for wire management windshield main support. [message #346099] |
Mon, 05 August 2019 18:38  |
 |
dservati1
Messages: 109
Registered: December 2013
Location: Western New York -Rochest...
Karma: 1
|
Senior Member |
|
|
hi all I'm looking for a clip of some sort perhaps one that someone's made on a 3D printer or has found one that fits/clips onto the center windshield support in order to hold/contain wires. I run two fans mounted near the rear view mirror, that plug into the cigarette lighter and the wire runs up the center support of the windshield. I've use tape,velcro hot glue and all have failed in the heat of Summer. I was looking for some sort of clip as there is a edge on the center support that seems like a cover or small clip could latch onto. This would also be helpful for anybody that has a GPS or window mounted radar detector to contain or hide the wires.. Anybody come up with a solution? I know I could always hardwire the fans and run the wire someplace behind the top cap but I was looking for something a little more straightforward and less permanent
'78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada on ION wheels,Green Brady Bunch stock
David Martin on Facebook
[Updated on: Mon, 05 August 2019 18:41] Report message to a moderator |
|
|
|
| Re: [GMCnet] Clips for wire management windshield main support. [message #346100 is a reply to message #346099] |
Mon, 05 August 2019 19:38  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
https://www.gmcrvparts.com/product-p/gm23-060-6.htm
On Mon, Aug 5, 2019 at 5:02 PM David via Gmclist
wrote:
> hi all I'm looking for a clip of some sort perhaps one that someone's
> made on a 3D printer or has found one that fits/clips onto the center
> windshield support in order to hold/contain wires. I run two fans mounted
> near the rear view mirror, that plug into the cigarette lighter and the
> wire runs up the center support of the windshield. I've use tape,velcro
> hot glue and all have fIled in the Heat of Summer. I was looking for some
> sort of clip as there is a edge on the center support that seems like a
> cover or small clip could latch onto. This would also be helpful for anybody
> that has a TPS or window mounted radar detector to contain or by the
> wires.. Anybody come up with a solution? I know I could always hardwire the
> fans
> and run the wire someplace behind the top cap but I was looking for
> something a little more straightforward.
> --
> '78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt
> tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
> wheels,Green Brady Bunch stock
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Clips for wire management windshield main support. [message #346101 is a reply to message #346099] |
Mon, 05 August 2019 19:48 |
emerystora
Messages: 4442
Registered: January 2004
Karma: 13
|
Senior Member |
|
|
That center support is hollow. I have wires running through it.
Emery Stora
> On Aug 5, 2019, at 5:38 PM, David via Gmclist wrote:
>
> hi all I'm looking for a clip of some sort perhaps one that someone's made on a 3D printer or has found one that fits/clips onto the center
> windshield support in order to hold/contain wires. I run two fans mounted near the rear view mirror, that plug into the cigarette lighter and the
> wire runs up the center support of the windshield. I've use tape,velcro hot glue and all have fIled in the Heat of Summer. I was looking for some
> sort of clip as there is a edge on the center support that seems like a cover or small clip could latch onto. This would also be helpful for anybody
> that has a TPS or window mounted radar detector to contain or by the wires.. Anybody come up with a solution? I know I could always hardwire the fans
> and run the wire someplace behind the top cap but I was looking for something a little more straightforward.
> --
> '78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
> wheels,Green Brady Bunch stock
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: Clips for wire management windshield main support. [message #346273 is a reply to message #346099] |
Fri, 09 August 2019 10:41 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I have two fans mounted on the mirror mount. Their wire runs inside the windshield center piece - it's hollow.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] Clips for wire management windshield main support. [message #346284 is a reply to message #346273] |
Fri, 09 August 2019 13:49 |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Walt Haley has a solid works file that makes nice clips if you want to go that way.
I know it’s a hollow response (pun intended), but I drilled a little hole and ran the wire in the windshield center support.
It’s, I dare say, hollow……..
Dolph
DE AD0LF
Wheeling, West Virginia
1977 26’ ex-PalmBeach
Howell EFI & EBL, Reaction Arms, Manny Transmission
“The Aluminum and Fiberglass Mistress"
> On Aug 9, 2019, at 11:41 AM, Johnny Bridges via Gmclist wrote:
>
> I have two fans mounted on the mirror mount. Their wire runs inside the windshield center piece - it's hollow.
>
> --johnny
> --
> Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> I forgive them all, save those who hurt the dogs. They must answer to me in hell
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
