GMCforum: GMCnet » Heres one request for the masses.....ill be shocked if someone has it.

Home » Public Forums » GMCnet » Heres one request for the masses.....ill be shocked if someone has it.

Show: Today's Messages :: Polls :: Message Navigator

Heres one request for the masses.....ill be shocked if someone has it. [message #344991]

Sat, 06 July 2019 18:35

6cuda6

Messages: 975
Registered: June 2019

Karma: -6

Senior Member

Here goes nothing....anyone know or have a service manual, schematics, napkin drawings or what have you for the living area of the Hughes built units?

Im literally working old school here with a DVM and tracing wires using continuity testing....

Rich Mondor, Brockville, ON 77 Hughes 2600

Report message to a moderator

Re: [GMCnet] Heres one request for the masses.....ill be shocked if someone has it. [message #344993 is a reply to message #344991]

Sat, 06 July 2019 18:40

k2gkk

Messages: 4452
Registered: November 2009

Karma: -8

Senior Member

I would start with the wiring diagrams for the "bare" coach that was the foundation for your upfit.

D C "Mac" Macdonald
Amateur Radio K2GKK
Since 30 November '53
USAF and FAA, Retired
Member GMCMI & Classics
Oklahoma City, OK
"The Money Pit"
TZE166V101966

________________________________
From: Gmclist on behalf of tonka6cuda6--- via Gmclist
Sent: Saturday, July 6, 2019 18:35
To: gmclist@list.gmcnet.org
Cc: tonka6cuda6@hotmail.com
Subject: [GMCnet] Heres one request for the masses.....ill be shocked if someone has it.

Here goes nothing....anyone know or have a service manual, schematics, napkin drawings or what have you for the living area of the Hughes built units?

Im literally working old school here with a DVM and tracing wires using continuity testing....
--
Rich Mondor,

Brockville, ON

77 Hughes 2600

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Heres one request for the masses.....ill be shocked if someone has it. [message #344994 is a reply to message #344993]

Sat, 06 July 2019 18:59

6cuda6

Messages: 975
Registered: June 2019

Karma: -6

Senior Member

Thanks Mac....been using those but the living area stuff is WAY different.....once you come off those stairs in the drivers compartment they are not even close....lol.

Rich Mondor, Brockville, ON 77 Hughes 2600

Report message to a moderator

Re: [GMCnet] Heres one request for the masses.....ill be shocked if someone has it. [message #344996 is a reply to message #344991]

Sat, 06 July 2019 19:12

emerystora

Messages: 4442
Registered: January 2004

Karma: 13

Senior Member

I’ll send you some diagrams and listing of the 23’ and 26’ interiors of the Hughes.

Emery Stora
77 Kingsley
Frederick, CO

> On Jul 6, 2019, at 5:35 PM, tonka6cuda6--- via Gmclist wrote:
>
> Here goes nothing....anyone know or have a service manual, schematics, napkin drawings or what have you for the living area of the Hughes built units?
>
>
> Im literally working old school here with a DVM and tracing wires using continuity testing....
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: Heres one request for the masses.....ill be shocked if someone has it. [message #344998 is a reply to message #344991]

Sat, 06 July 2019 19:52

C Boyd

Messages: 2629
Registered: April 2006

Karma: 18

Senior Member

http://bdub.net/publications/Hughes/Hughes1.htm

C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

Re: Heres one request for the masses.....ill be shocked if someone has it. [message #344999 is a reply to message #344998]

Sat, 06 July 2019 20:39

6cuda6

Messages: 975
Registered: June 2019

Karma: -6

Senior Member

Thanks folks for the info....got that one...now lets see if anyone can dig deeper perhaps?

Rich Mondor, Brockville, ON 77 Hughes 2600

Report message to a moderator

Re: Heres one request for the masses.....ill be shocked if someone has it. [message #345000 is a reply to message #344999]

Sat, 06 July 2019 21:41

C Boyd

Messages: 2629
Registered: April 2006

Karma: 18

Senior Member

Do you have a rear bath or side bath (wet or dry) ? 12V dc system or 110 ac system or looking for help with both? Hughes only made bout 70 some but were a little of every configuration which makes me think they might be one off as each were built. Check your private messages cause if anybody can help; it would be Emery. I don't think he throws nothing away and remembers where he keeps it.

C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

Re: Heres one request for the masses.....ill be shocked if someone has it. [message #345003 is a reply to message #345000]

Sun, 07 July 2019 03:48

6cuda6

Messages: 975
Registered: June 2019

Karma: -6

Senior Member

C Boyd wrote on Sat, 06 July 2019 22:41

Do you have a rear bath or side bath (wet or dry) ? 12V dc system or 110 ac system or looking for help with both? Hughes only made bout 70 some but were a little of every configuration which makes me think they might be one off as each were built. Check your private messages cause if anybody can help; it would be Emery. I don't think he throws nothing away and remembers where he keeps it.

Its a side bathroom without the tub (i guess they call it a sit shower?). Been working through 12vdc stuff like lights etc that dont work....looks like i got most of it taken care of as of late last night. I looks like the living area fuses/circuits all originate from the 12vdc/120vac inverter not like the 81 and 84 series units which have a seperate fuse block.

Next we will go through the cab/drivers area wiring but at least i have the manual for that.....oh i love electrical, i love electrical, i love electrical....i just keep telling myself....lol.

Rich Mondor, Brockville, ON 77 Hughes 2600

Report message to a moderator

Re: [GMCnet] Heres one request for the masses.....ill be shocked if someone has it. [message #345012 is a reply to message #344999]

Sun, 07 July 2019 11:42

Kimberlea Weeks

Messages: 675
Registered: July 2010

Karma: 6

Senior Member

Additional details at: https://www.gmcmi.com/hughes/

Kimberlea Weeks | GMC Motorhomes International
1402 So. Cage Blvd., Unit 273 | Pharr, TX 78577-6288
612.501.4600 | f.866.519.0047 | www.gmcmi.com

On Sat, Jul 6, 2019 at 8:39 PM tonka6cuda6--- via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Thanks folks for the info....got that one...now lets see if anyone can dig
> deeper perhaps?
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Previous Topic:	[GMCnet] I just installed Vintage A/C's + Sanden compressors in two GMCs
Next Topic:	Power Steering Pump Pulley

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Dec 26 09:11:26 CST 2024

Total time taken to generate the page: 0.01662 seconds