|
|
|
|
| Re: [GMCnet] A/C compressor rear mount. [message #343869 is a reply to message #343860] |
Mon, 03 June 2019 06:48   |
TR 1
Messages: 348
Registered: August 2015
Location: DFW
Karma: -7
|
Senior Member |
|
|
When I bought my coach, it had the Leigh Harrison serpentine system with a Sanden SD7 compressor... I ended up returning the system to V-belts, and since there was no longer a belt tensioner, I had to fabricate a way to tension the SD7.... Front was fairly straight forward, but I could not copy what I made for the front to use for the rear mount, as the mounting position was different. I thought about just going with the front mount without anything on the rear, but in the end to be safe, I went with one of these to support the rear of the compressor:
https://www.summitracing.com/parts/sum-420302?rrec=true
Hope this helps someone....
Mark S. '73 Painted Desert,
Manny 1 Ton Front End,
Howell Injection,
Leigh Harrison 4bag and Rear Brakes,
Fort Worth, TX
|
|
|
|
| Re: [GMCnet] A/C compressor rear mount. [message #343945 is a reply to message #343869] |
Wed, 05 June 2019 11:50 |
Keith V
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Just be carefull of the AC hoses, make damn sure they are not anywhere near the Compressor pulley as those bolts will eat the hose!
Mine only touched on acceleration when the engine torqued over, it too 2 or 3 starts to ruin the hose
________________________________
From: Gmclist on behalf of Mark Sawyer via Gmclist
Sent: Monday, June 3, 2019 6:48 AM
To: gmclist@list.gmcnet.org
Cc: Mark Sawyer
Subject: Re: [GMCnet] A/C compressor rear mount.
When I bought my coach, it had the Leigh Harrison serpentine system with a Sanden SD7 compressor... I ended up returning the system to V-belts, and
since there was no longer a belt tensioner, I had to fabricate a way to tension the SD7.... Front was fairly straight forward, but I could not copy
what I made for the front to use for the rear mount, as the mounting position was different. I thought about just going with the front mount without
anything on the rear, but in the end to be safe, I went with one of these to support the rear of the compressor:
https://www.summitracing.com/parts/sum-420302?rrec=true
Hope this helps someone....
--
Mark S. '73 Painted Desert,
Manny 1 Ton Front End,
Howell Injection,
Leigh Harrison 4bag and Rear Brakes,
Fort Worth, TX
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
