GMCforum: GMCnet » [GMCnet] Have rear spindles/hubs on hand for on the road emergencies.

Home » Public Forums » GMCnet » [GMCnet] Have rear spindles/hubs on hand for on the road emergencies.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Have rear spindles/hubs on hand for on the road emergencies. [message #343818]

Fri, 31 May 2019 14:09

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

If anyone loose a rear spindle, bearing, and hub/drum on the road. I have some cleaned up, and ready to ship right away. Iowa Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Have rear spindles/hubs on hand for on the road emergencies. [message #343822 is a reply to message #343818]

Fri, 31 May 2019 15:46

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

BobDunahugh wrote on Fri, 31 May 2019 15:09

If anyone loose a rear spindle, bearing, and hub/drum on the road. I have some cleaned up, and ready to ship right away. Iowa Bob Dunahugh

Bob,

Not that I don't appreciate this and it sure might get someone sensitive parts out of a tight place. (I might have appreciated it a lot one other day.)
It might be good to have a backplate and brake kit with it. Only a few of the parks are not the same right for left, and the owner may not need much of the kit if he has a disk conversion on the back.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] Have rear spindles/hubs on hand for on the road emergencies. [message #343833 is a reply to message #343818]

Sat, 01 June 2019 07:28

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

Rather more to the point, how ablout a loaner press plate to swap spindles. Simple and cheap.

--johnny

(Bob, we all have great ideas for <you> to implement:))

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Previous Topic:	converter tripping GFI
Next Topic:	[GMCnet] Having a trans rebuilt next week for on the road emerigencies for others.

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 08 20:27:22 CST 2024

Total time taken to generate the page: 0.00707 seconds