| [GMCnet] Uncurving the door [message #343508] |
Mon, 20 May 2019 10:39 |
glwgmc
Messages: 1014
Registered: June 2004
Karma: 10
|
Senior Member |
|
|
Before going too far down the door recurving project be sure to read Jim Bounds recent blog postings. They apparently are findings the outrigger portion of the floor supports are collapsing downward causing the body to change shape. They are now adding angle supports under the floor to raise the outrigger portions back to the correct position thereby restoring the proper sidewalk shape.
If your floor is failing in that way, recurving the door may just be covering up the root cause. If the outrigger section continues to fall downward you could find yourself constantly recurving the door to match the ever changing side wall shape.
Jerry
Jerry Work
Kerby, OR
————-///
Date: Sun, 19 May 2019 21:24:37 -0500
From: Vern Crawford
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Uncurving the Door
Message-ID:
Content-Type: text/plain; charset="UTF-8"
Wow! When I tackle the door on AaRVee I know what method I?m going to
use. Full control for perfect results!
Hugs,
Vern (and Lenore)
On Sun, May 19, 2019 at 8:57 PM Ken Henderson via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Yep. Just be sure to use a well padded force-spreading device on the
> finished surface of the door.
>
> Ken H.
——————2222
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
