GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Honda Seats
Honda Seats [message #342495] Sat, 13 April 2019 10:00 Go to next message
tgeiger is currently offline  tgeiger   United States
Messages: 518
Registered: February 2006
Location: kansas city
Karma: -1
Senior Member
So I'm putting in iso pads finally on my coach in the effort to improve ride and road noise. It was suggeted to put in new seats for ride comfort as well. Been thinking about doing the Honda seat conversion. Any sources for the seats? Last I knew there was one in Albuquerque?? Anything closer to KCMO?

Thanks,
Tom
76 Eleganza 2
KCMO


Tom Geiger 76 Eleganza II KCMO
Re: [GMCnet] Honda Seats [message #342500 is a reply to message #342495] Sat, 13 April 2019 13:25 Go to previous message
Gary Worobec is currently offline  Gary Worobec   United States
Messages: 867
Registered: May 2005
Karma: -1
Senior Member
See if you have anyone in KC that does handicapped van conversions. You might be able to get some takeout buckets from the rear seating area. Maybe these guys would know
https://www.unitedaccess.com/locations-kansas-city-mo

Gary

> On Apr 13, 2019, at 8:00 AM, tom geiger via Gmclist wrote:
>
> So I'm putting in iso pads finally on my coach in the effort to improve ride and road noise. It was suggeted to put in new seats for ride comfort as
> well. Been thinking about doing the Honda seat conversion. Any sources for the seats? Last I knew there was one in Albuquerque?? Anything closer to
> KCMO?
>
> Thanks,
> Tom
> 76 Eleganza 2
> KCMO
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Previous Topic: [GMCnet] The Dancing Avion
Next Topic: [GMCnet] Torque Wrench Calibration at Tallahassee
Goto Forum:
  


Current Time: Mon Sep 23 09:32:55 CDT 2024

Total time taken to generate the page: 0.00529 seconds