Heater Pin [message #339005] |
Fri, 23 November 2018 17:06 |
GeorgeRud
Messages: 1380 Registered: February 2007 Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
We had some issues with the heater controls in the coach, and discovered a broken pin in the control unit. Replacing the plastic pin with the metal one from Sirums, cleaning and lubricating the plastic pieces (and Bowden cable) with a touch of white grease, made a world of difference. Now it feels like new! It's nice to get a project like this done with minimal headaches.
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|
Re: Heater Pin [message #339006 is a reply to message #339005] |
Fri, 23 November 2018 17:14 |
mghamms
Messages: 466 Registered: March 2016 Location: Ware, Massachusetts
Karma: 2
|
Senior Member |
|
|
What pin is this?
The one the holds the vacuum plates together?
GeorgeRud wrote on Fri, 23 November 2018 17:06We had some issues with the heater controls in the coach, and discovered a broken pin in the control unit. Replacing the plastic pin with the metal one from Sirums, cleaning and lubricating the plastic pieces (and Bowden cable) with a touch of white grease, made a world of difference. Now it feels like new! It's nice to get a project like this done with minimal headaches.
1977 Kingsley 455 as stock as it gets except lots of Ragusa parts
|
|
|
Re: Heater Pin [message #339008 is a reply to message #339005] |
Fri, 23 November 2018 19:09 |
GeorgeRud
Messages: 1380 Registered: February 2007 Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
Yep, the original one had fractured and needed to be replaced. The $500 cost for a rebuilt one inspired me to give it a try and it went well. Just be careful working with 40+ year old plastic.
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|