Re: [GMCnet] Drapes: does anyome manufacture replacements? [message #331671] |
Wed, 02 May 2018 23:08 |
BobDunahugh
Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
We have the ones that Gary sells. Love them. Had them in our last GMC also. We have a 78 Royale. So I made our valance out of solid walnut. Used 3/4 X 4 X 34" on the walls. Then another piece of walnut on the face. 3/8 X 3 X 34". To get the 3/4 piece to match the curve of the walls. I placed the board against the door jam. Then traced the wall curve. Want some photos. Let me know. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Drapes: does anyome manufacture replacements? [message #331677 is a reply to message #331671] |
Thu, 03 May 2018 05:27 |
Will Albers
Messages: 183 Registered: November 2017 Location: Detroit MI (Belleville)
Karma: 2
|
Senior Member |
|
|
yes please!!!
Would anyone consider making a second set? I'm just not a woodworker
On Thu, May 3, 2018 at 12:08 AM, Bob Dunahugh wrote:
> We have the ones that Gary sells. Love them. Had them in our last GMC
> also. We have a 78 Royale. So I made our valance out of solid walnut. Used
> 3/4 X 4 X 34" on the walls. Then another piece of walnut on the face. 3/8
> X 3 X 34". To get the 3/4 piece to match the curve of the walls. I placed
> the board against the door jam. Then traced the wall curve. Want some
> photos. Let me know. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
1978 Palm Beach.
Detroit Michigan
|
|
|